CDA Understanding Ventilation for Built-in Ovens: A Comprehensive Guide
Page 8

Ventilation

The appliance should be installed into a room or space with an air supply in accordance with BS 5440-2: 2000.

For rooms with a volume of less than 5 m3 - permanent ventilation of 100 cm2 free area will be required.

For rooms with a volume of between 5 m3 and 10 m3 a permanent ventilation of 50 cm2 free area will be required unless the room has a door which opens directly to the outside air in which case no permanent ventilation is required.

For rooms with a volume greater than 10 m3 - no permanent ventilation is required.

NB. Regardless of room size, all rooms containing the appliance must have direct access to the outside air via an openable window or equivalent.

Where there are other fuel burning appliances in the same room, BS 5440-2: 2000 should be consulted to determine the correct amount of free area ventilation requirements.

The above requirements allow also for use of a gas oven and grill but if there are other gas burning appliances in the same room, consult a qualified engineer.

Location

The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but not in a room or space containing a bath or a shower.

The appliance must not be installed in a bed-sitting room of less than 20 m3.

The appliance is designed and approved for domestic use only and should not be installed in a commercial, semi commercial or communal environment.

Your product will not be guaranteed if installed in any of the above environments and could affect any third party or public liability insurances you may have.

The oven is designed to fit into a cabinet of 600 mm width.

The oven can be built in or built under the kitchen units, but you must ensure that it is properly ventilated.

In the diagram the built in oven is ventilated by means of a space at the top of the kitchen cabinet. There are many other methods of ventilating your oven.

Consult a qualified engineer for advice.

IMPORTANT: If the oven is being installed into a built under oven housing unit ensure that the front rail at the top of the unit is not installed as it will restrict ventilation.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents SC309 Gas Oven Installation Before USEElectrical supply to your oven DetailsConnection by a Three PIN Socket Fig General Notes Feeder Special Cable Section Type HO5RR-FGas supply requirements Important NoteIMPORTANT! Do not use a naked flame to test for leaks Ventilation LocationHow to install your oven Replacement of the Oven Burner Injector Gas conversion to L.P.G. or Natural gasReplacement of the Grill Burner Injector Flames regulation of the oven and grill burners Regulation of the Minimum Flame How to use your gas oven How to use your gas oven/gas grill General FeaturesTimer Thermostat KnobLighting of Oven Burner Lighting of GAS Grill Burner Traditional Grilling Oven LightSafety Cooking guideTemperature recipe guide Cleaning and Maintenance General CleaningCleaning and Maintenance Oven DoorEnamelled Parts Inside of OvenIf you have a problem with your oven If YOU have a Problem with Your OvenAppliance servicing Guarantee Limit of CoverPage Gas ovens

SC309 specifications

The CDA SC309 represents a significant advancement in the world of kitchen appliances, specifically designed to enhance cooking efficiency and convenience. This cooker hood is a perfect blend of functionality and modern design, making it an essential addition to contemporary kitchens.

One of the standout features of the CDA SC309 is its powerful extraction rate. With a maximum extraction speed of 400m³/h, it effectively eliminates smoke, steam, and odors, ensuring that the kitchen remains fresh and pleasant. The appliance operates at varying extraction speeds, allowing users to adjust it according to their cooking needs, providing flexibility during food preparation.

The CDA SC309 is equipped with energy-efficient LED lighting that illuminates the cooking area effectively. This not only enhances visibility but also consumes less energy compared to traditional lighting, contributing to lower electricity bills. The integrated lights are strategically placed to provide ample brightness, ensuring that every aspect of cooking is clear and visible.

In terms of design, the CDA SC309 showcases a sleek and modern aesthetic, characterized by clean lines and a stylish stainless-steel finish. This design makes it a perfect fit for various kitchen styles, whether traditional or contemporary. Its wall-mounted installation further saves space, adding to the overall utility of the kitchen area.

Another defining characteristic of the CDA SC309 is its user-friendly controls. The appliance features an intuitive touch control panel, making it easy to operate even for those unfamiliar with advanced kitchen equipment. This panel allows users to switch between extraction speeds effortlessly and control the lighting with simple taps, enhancing the overall user experience.

Moreover, the CDA SC309 incorporates advanced filtration technologies. It uses a combination of grease filters and charcoal filters, designed to trap grease and odors effectively. These filters are washable, which contributes to lower maintenance costs and ensures optimal performance over time. Regular cleaning of the filters not only maintains efficiency but also prolongs the lifespan of the cooker hood.

In conclusion, the CDA SC309 is an exemplary appliance that combines high-performance extraction capabilities with modern design and user-friendly features. Its efficient LED lighting, advanced filtration system, and stylish aesthetic make it a valuable addition to any kitchen, ensuring that cooking is not just convenient but also enjoyable.
Top Page Image Contents