Before First USE, Operating Instructions

BEFORE FIRST USE

Before using your Cuisinart® Countertop Filtration System for the first time, it is recommended that the unit be flushed through with fresh water. Please be sure to read the following instructions before flushing your water dispenser.

NOTE: Do NOT plug the unit in or install the filter yet.

1.Remove your Cuisinart® Countertop Filtration System carefully from the box. You may wish to store the packaging for future use.

2.Position the unit on a stable flat surface, close to a main power outlet, not in direct sunlight and out of the reach of children.

3.Make sure that there is sufficient space around the water dispenser to allow the heat extracted during the chilling process to dissipate. Allow at least 3" (6 cm) of space around the sides and rear of the unit for air circulation.

OPERATING

INSTRUCTIONS

Installing the Water Filter

1.Remove the water filter from its packaging (it is normal for the filter to appear moist during storage). DO NOT WASH FILTER

ELEMENT WITH SOAP AND WATER.

2. Place water filter in bowl in upright position.

3. Add enough cold water to ensure that filter is fully submerged when pushed down. Hold filter upright, under water, and gently agitate it for 1 or 2

minutes or until you stop

seeing bubbles rising to surface. Continue to soak

filter for at least 15 minutes.

NOTE: Filter may not completely sink to the bottom.

4.While the filter is soaking, remove the unfiltered/upper water tank and filtered/lower water tank. Wash both tanks and plastic lid in mild, soapy water, and rinse.

5.When filter is thoroughly soaked, lift it from bowl and allow water to drain.

NOTE: The filter contains a small amount of loose carbon dust, which may make water appear dark during soaking – once the preparation process

is complete, dust will be rinsed out of filter.

6. Insert the water filter into the upper water tank and push firmly into place.

7.Hold the upper water tank with the filter in it under cold running tap water for 15 seconds to flush.

8.Let water drain from water tank.

9.Fit the unfiltered/upper water tank onto the filtered/lower water tank and place cover on top. NOTE: The indent on the upper water tank must face to the back of unit when in place.

10.Place the reassembled tanks on the base.

Setting Up Your Cuisinart Countertop Filtration System

1.Lift the flip top lid, and using a clean pitcher, pour cold tap water into the unfiltered/ upper water tank until full.

Note: Only cold tap water is to be poured into the unit.

2.Allow approximately 15 minutes for water to filter into the filtered/lower water tank. NOTE: Tank must be at least ½ full before proceeding to Step #3.

WCH-950C specifications

The Cuisinart WCH-950C is a versatile wine and beverage cooler designed for wine enthusiasts and those who appreciate perfectly chilled beverages. This high-performance unit accommodates a wide array of standard and larger wine bottles, making it a valuable addition to any home bar or kitchen setting.

One of the main features of the WCH-950C is its dual-zone temperature control. This innovative technology allows users to store red and white wines at their ideal serving temperatures simultaneously, enhancing the overall wine-tasting experience. The upper zone typically accommodates white wines, while the lower zone is ideal for red wines. With a temperature range of 39°F to 64°F, the cooler caters to various wine preferences while maintaining optimal conditions.

Another notable characteristic of the Cuisinart WCH-950C is its sleek design. The cooler features a stainless steel door framed by a black cabinet, offering a modern aesthetic that complements a variety of decors. The UV-protected glass door not only enhances visibility, allowing you to showcase your collection but also protects your wines from harmful light that can compromise quality.

The interior of the Cuisinart WCH-950C is spacious and thoughtfully designed. With the capacity to hold up to 28 standard wine bottles, it also includes removable shelves that can be adjusted to accommodate larger bottles or other beverages. The shelves are constructed from sturdy wood, providing a stylish touch while effectively preventing any unnecessary vibrations that could disturb the wine.

For added convenience, the WCH-950C comes equipped with an intuitive digital control panel that allows users to set and monitor the temperature easily. The unit also features a soft interior light, making it easy to view your collection without unnecessarily exposing the bottles to heat.

In terms of energy efficiency, the Cuisinart WCH-950C operates quietly with minimal energy consumption, making it an eco-friendly choice. The cooler uses a fan-assisted cooling system to circulate air evenly throughout, ensuring consistent temperatures across all shelves.

Overall, the Cuisinart WCH-950C is an excellent investment for wine lovers, equipping them with a stylish, efficient, and highly functional wine cooler that preserves the integrity and flavor of their cherished bottles. Whether entertaining guests or enjoying a quiet evening at home, this cooler is designed to enhance the experience of enjoying fine wines and beverages.