Behringer Autocom PRO-XL MDX1600, Composer PRO-XL MDX2600, Multicom MDX4600 manual Phones Output

POWERPLAY PRO-XL HA4700/PRO-8 HA8000

Fig. 4.4: 1/4" TRS connector for headphones operation

+Please assure that the unit is installed and operated only by people with an understanding of the unit’s functions. During and after the installation always make sure that those handling the unit are themselves properly grounded. Failure to do so may cause undesirable or faulty operation through electrostatic discharge.

￿￿￿￿￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿5. SPECIFICATIONS	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
MAIN IN	HF-filtered, servo-balanced XLR- and	HF-filtered, servo-balanced 1/4" TRS
	1/4" TRS connectors	connectors
Input impedance	40 kΩ balanced,	40 kΩ balanced,
	30 kΩ unbalanced	20 kΩ unbalanced
Max. input level	16 dBu balanced and unbalanced
CMRR	typically 40 dB, >55 dB @ 1 kHz
AUX IN	1/4" TRS connector (stereo)	-
Input impedance	5 kΩ	-
Max. input level	+22 dBu	-
DIRECT IN	1/4" TRS connector (stereo)
￿￿￿￿￿￿￿￿￿￿￿￿￿Input impedance	15 kΩ
MAIN OUT	XLR- and 1/4" TRS connectors, balanced	-
PHONES￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿OUTPUT	1/4" TRS connector (stereo)
Max. output power	+24 dBm (load impedance 100 Ω)	+24 dBm (load impedance 100 Ω)
	+21 dBm (load impedance 8 Ω)
￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿Min. output load impedance	8 Ω	100 Ω
Frequency response	10 Hz to 150 kHz, +/-3 dB
Noise	22 Hz to 22 kHz >90 dB @ 0 dBu
Dynamic range	22 Hz to 22 kHz: 110 dB
Distortion (THD)	0.006 % typ. @ +4 dBu,
	1 kHz, Gain 1
	(continued on next page)

5. SPECIFICATIONS 7