Extron electronic XTRA SERIES manual Flexible Conduit Adapter Kit Installation

Page 12

Rack Mounting Ventilation Recommendations

Excessive heat can decrease the optimal lifetime of the power amplifier. An over temp indicator LED on the front panel of the amplifier lights red whenever the recommended operating temperature has been exceeded (see Front Panel Features and Operation on page 9).

To reduce the chances for an over temp condition, the XPAs should be arranged in a rack environment so that adequate airflow is available both above and below the XPA whenever possible. No more than two XPAs should be arranged one-on-top-of-the-other in a rack without an open space between them, as shown in the following illustration. An XPA can also be arranged above or below another non-XPA device, but there must be an open space both above and below those devices.

Vent

Space

 

 

Vent

 

 

Space

 

 

Vent

Vent

Space

Space

 

Vent

 

 

Space

Vent

Space

 

 

 

 

Figure 4. Allow Sufficient Spacing for Adequate Ventilation

Flexible Conduit Adapter Kit Installation

WARNING: Failure to follow these instructions may result in serious injury.

The circuit breaker used for this connection should be rated no lower than 20 amps and no greater than 30 amps.

This unit must be installed in accordance with the National Electrical Code and with all local codes.

An ALL-POLE MAINS SWITCH with a contact separation of at least 3 mm in each pole shall be incorporated in the electrical installation of the building. The installation shall be carried out in accordance with all applicable installation rules.

Installation and service must be performed by a qualified electrician only.

Make sure that the source device and the XPA are turned off and disconnected from the power source before you begin.

ATTENTION: A UL listed electrical distribution box is recommended for the termination of the conduit opposite the XPA (see the following UL Requirements section on page 7).

XTRA Series Half-Rack Audio Power Amplifiers • Installation

6

Image 12
Contents User Guide Safety Instructions FCC Class B Notice Conventions Used in this GuideNotifications Page Contents Page Features Continuous power output for larger roomsAbout this Manual Terms Used in this ManualXtra Series Half-Rack Audio Power Amplifiers Introduction Application Examples XPA 1002 Series Application ExampleMounting the Xtra Series Amplifiers Tabletop UseUL Guidelines for Rack Mounting Rack Mounting Rack Mounting of the AmplifierFlexible Conduit Adapter Kit Installation Allow Sufficient Spacing for Adequate VentilationUL Requirements Removing the IEC Connector Front Panel Features and Operation Power indicator LED This LED lightsLIMITER/PROTECT Rear Panel Features and Operation XPA XPA 1002 Plus Rear PanelBalanced or unbalanced stereo or mono audio input connector Inputs 3 4 XPA XPA 1002 Plus XPA Remote Volume Control Controlling Multiple Amplifiers with One Volume Controller Bridged Mono Output Bridging the Output of the XPA 1002 SeriesTroubleshooting Amplifier Fails to Exit Standby Mode PromptlyAmplifier Enters Standby Mode Too Early Limiter/Protect LED Warning IndicatorsOver Temp Indicator LED LED State Problem Description Problem SolutionUSA, Canada, South America Central America Japan Europe and Africa ChinaAsia Middle East Europe
Related manuals
Manual 23 pages 191 b

XTRA SERIES specifications

The Extron XTRA Series is designed to redefine performance in the realm of AV system control and signal processing. This extensive lineup comprises high-quality products that cater to the demands of modern AV environments, ensuring seamless integration and exceptional functionality.

One of the hallmark features of the XTRA Series is its advanced signal routing capabilities. With support for a variety of audio and video formats, including HDMI, HDBaseT, and analog signals, users can easily manage and distribute content across multiple displays and zones. This versatility is crucial for settings such as educational institutions, corporate environments, and large venues where different types of media are routinely used.

A standout characteristic of the XTRA Series is its robust control capabilities. The series incorporates Extron's signature GlobalViewer Enterprise software, enabling users to monitor and manage AV devices remotely. This feature not only simplifies system administration but also enhances troubleshooting efficiency, allowing technicians to quickly identify and resolve issues without needing to be physically present.

In terms of technology, the XTRA Series is built on Extron's advanced DSP (Digital Signal Processing) platform. This ensures superior audio quality, with features like automatic gain control, equalization, and feedback suppression, which are essential for delivering clear and articulate sound in any environment. Additionally, the series includes built-in video scaling and switching technologies, allowing for high-resolution output that maintains the integrity of the original media.

Another important aspect of the XTRA Series is its user-friendly interface. Many products in this lineup are designed with customizable touch panels and intuitive control systems that can be tailored to meet the specific needs of various users. This adaptability makes it easy for anyone, regardless of technical expertise, to operate and manage AV systems effectively.

The XTRA Series is also designed with reliability in mind. With durable construction and rigorous testing processes, these products are built to perform consistently in high-demand environments. This reliability is further complemented by Extron's dedicated customer support, providing users with the assistance and resources needed to maximize their system's capabilities.

Overall, the Extron XTRA Series stands as a testament to innovation in AV technology, combining sophisticated signal processing, intuitive control, and exceptional reliability to provide comprehensive solutions for a wide array of applications. Whether for corporate environments, educational facilities, or large-scale events, the XTRA Series ensures that users enjoy a seamless and enriched audio-visual experience.