Ariston FZ 51 IX AUS, FZ 51 AUS manual Electrical connections, Data Plate

Page 3

Electrical connections

!Ovens equipped with a three-pole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the data plate located on the appliance (see below).

Fitting the power supply cable

1. Open the terminal board by inserting a screwdriver into the side tabs of the cover. Use the screwdriver as a lever by pushing it down to open the cover (see diagram).

 

 

2. Install the power

 

 

supply cable by

 

 

loosening the cable

 

 

clamp screw and the

 

 

three wire contact

 

 

screws L-N- . Connect

 

 

the wires to the

 

 

corresponding

N

L

terminals: the Blue wire

to the terminal marked

 

 

 

 

(N), the Brown wire to

the terminal marked (L) and the Yellow Green wire

to the terminal marked (see diagram).

3.Secure the cable by fastening the clamp screw.

4.Close the cover of the terminal board.

Before connecting to the power supply, make sure that:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate (see below).

•The voltage must be in the range between the values indicated on the data plate (see below).

•The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it. Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

GB

Connecting the supply cable to the mains

Install a standardised plug corresponding to the load indicated on the data plate (see side).

The appliance must be directly connected to the mains using an omnipolar circuit-breaker with a minimum contact opening of 3 mm installed between the appliance and the mains, suitable for the load indicated and complying with current electrical regulations (the earthing wire must not be interrupted by the circuit-breaker). The supply cable must not come into contact with surfaces with temperatures higher than 50°C.

!The installer must ensure that the correct electrical connection has been made and that it is compliant with safety regulations.

DATA PLATE

 

 

 

Dimensions

width cm 43.5

height cm 32

 

depth cm 41.5

 

 

Volume

lt. 58

 

 

Electrical

voltage: 240V~ 50/60 Hz

connections

maximum power absorbed 2400W

 

 

 

This appliance conforms to the

 

following European Economic

 

Community directives:

 

- 73/23/EEC of 19/02/73 (Low

 

Voltage) and subsequent

 

amendments;

 

-89/336/EEC of 03/05/89

 

(Electromagnetic Compatibility) and

 

subsequent amendments;

 

- 93/68/EEC of 22/07/93 and

 

subsequent amendments.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Operating Instructions ContentsPositioning InstallationData Plate Electrical connectionsDescription of the appliance Overall viewControl panel How to use the timer Start-up and useStarting the oven Cooking modes Practical cooking adviceOven Cooking advice tableRespecting and conserving the environment Precautions and tipsGeneral safety DisposalMaintenance and care Page Page Xerox Business Services

FZ 51 IX AUS, FZ 51 AUS specifications

The Ariston FZ 51 AUS and FZ 51 IX AUS are two exceptional models in the realm of frost-free refrigerators, offering versatile features designed to enhance convenience and efficiency in modern kitchens. With a sleek design and impressive functionality, these refrigerators stand out as reliable appliances for homes.

One of the main features of the Ariston FZ 51 AUS and FZ 51 IX AUS is their frost-free technology. This innovative system eliminates the need for manual defrosting, ensuring that ice build-up is minimized, thus maximizing storage space and maintaining optimal performance. The even cooling throughout the appliance is facilitated by advanced air circulation, guaranteeing that every compartment stays at a consistent temperature.

Both models come equipped with a spacious interior layout, designed to accommodate various food storage needs. The adjustable shelves provide flexibility, allowing users to modify the space according to their preferences and requirements. Additionally, the inclusion of door balconies enhances storage options, accommodating bottles and jars for easy access.

Energy efficiency is a significant characteristic of the Ariston FZ 51 AUS and FZ 51 IX AUS. These models are designed to operate with minimal energy consumption, helping users save on their electricity bills while also being environmentally friendly. The energy rating is noteworthy, reflecting Ariston's commitment to sustainability and responsible manufacturing.

The design of these refrigerators is not just functional but visually appealing as well. The stainless steel finish of the FZ 51 IX AUS model adds a touch of elegance, making it a prominent feature in any kitchen. In contrast, the FZ 51 AUS model presents a clean and contemporary appearance, suitable for various kitchen styles.

Both models also feature a user-friendly control panel, enabling easy temperature adjustments and settings. The interior lighting is another thoughtful addition, providing excellent visibility of stored items, particularly in low-light conditions.

In summary, the Ariston FZ 51 AUS and FZ 51 IX AUS are a perfect blend of style, functionality, and efficiency. With their advanced technologies, sufficient storage capacity, and energy-saving features, these refrigerators are ideal companions for any modern household, catering to the demands of busy lifestyles while ensuring food is kept fresh and well-preserved.
Top Page Image Contents