Extron electronic FOX 2G Tx manual Audio Connections, Audio connections

Page 24

Installation and Setup, cont’d

Audio Connections

Audio input to the FOX 2G Tx AV and audio output from the FOX 2G Rx AV are made through the 3.5 mm, 5-pole, captive screw connectors. Input and output can be mono or stereo and can be balanced or unbalanced, depending on the wiring connections (see figure below).

Do not tin the wires!

Tip

L

Tip

Ring

Sleeve

 

Sleeves

 

Tip

Tip

R

Ring

Sleeve

 

Balanced Audio

Unbalanced Audio

Figure 2-9 — Audio connections

L R

NThe length of the exposed wires in the stripping process is critical. The ideal length is 3/16” (5 mm). Any longer and the exposed wires may touch, causing a short circuit between them. Any shorter and the wires can be easily pulled out even if tightly fastened by the captive screws.

CDo not tin the wires. Tinned wire does not hold its shape and can become loose over time.

The table below shows the initial gain differences between audio input/output connectors, using captive screw connectors. The unbalanced output from the captive screw connector will be half (-6 dB), regardless of input.

Input

Output

Gain

Balanced

Balanced

0 dB (unity)

 

 

 

Balanced

Unbalanced

-6 dB (half)

 

 

 

Unbalanced

Balanced

0 dB

 

 

 

Unbalanced

Unbalanced

-6 dB

Additional adjustment of audio gain/attenuation can be made using SIS commands (see page 3-8).

NThe Audio LED lights up immediately when the transmitter detects an audio signal 35 dB below the nominal level. It remains lit until the audio signal drops below that threshold continuously for 10 seconds.

2-12 FOX 2G Tx/Rx AV • Installation and Setup

Image 24
Contents FOX 2G Tx/Rx AV Video and Audio Fiber Optic Transmitter and ReceiverPrecautions 安全须知 中文 FCC Class a NoticePage Quick Start Guide -­ FOX 2G Tx/Rx AV FOX 2G Tx/Rx AV Quick Start Guide QS-1Quick Start Guide -­ FOX 2G Tx/Rx AV, cont’d QS-2 FOX 2G Tx/Rx AV Quick Start GuideTable of Contents Table of Contents, cont’d One About this Manual About the FOX 2G Tx/Rx AVFOX 2G Tx/Rx AV Introduction FOX 2G Tx/Rx AV Features Introduction, cont’d FOX 2G Tx/Rx AV Application Diagram Extron FOX 2G Tx AVTwo Tabletop placement FOX 2G Tx/Rx AV Installation and SetupMounting the FOX 2G Tx/Rx AV Rack MountingRack mounting procedures FOX 2G Tx/Rx AV Installation and SetupInstallation and Setup, cont’d Under-desk mountingThrough-desk mounting Through-desk mountingProjector mounting Projector mountingU-bolt attachment Installation and Setup, cont’d Front Panel Features FOX 2G Tx AVFOX 2G Rx AV Rear Panel Features FOX 2G Tx AVInstallation and Setup, cont’d Operation Power InputVideo Connections BNC Input Mini DIN InputAudio Connections Audio connectionsAlarm Fiber Optic Cable Connector Daisy Chain Capability Extron FOX 2G Tx AVInstallation and Setup, cont’d Three FOX 2G Tx/Rx AV Configuration RS-232 PortsRear panel RS-232 Remote port Configuration, cont’d RS-232 Control of Tx and Rx Units ReceiverSimple Instruction Set SIS Commands Introduction to SISConfiguration, cont’d Symbols used in this manualError messages Command/Response Table for SIS Commands Command Ascii Command ResponseAdditional description Command Ascii Command Response Additional description ConfigurationMemory Presets Output video formatAudio mute Audio gain and attenuationFOX 2G Tx/Rx AV Audio output level Auto MemoryAuto Image Test PatternLink #2 Transmission AudX#X1!X1@ Information RequestFactory Defaults Status RequestInstalling the software Windows-Based Program ControlStarting the program FOX Extender WCP window Status areaMemory Preset area Mute areaVideo Adjustment area Video Format areasAdvanced Configuration area 12 Advanced Configuration areaAudio Adjustment area 13 Audio Adjustment areaFirmware for FOX 2G Tx/Rx AV SIS Command Validity Table AdjustmentConfiguration, cont’d AAppendix a Specifications FOX 2G Tx/Rx AV Reference InformationVideo Video input transmittersVideo output receivers Reference Information, cont’d AudioAudio inputs transmitters Audio outputs receiversControl/remote GeneralEMI/EMC Optional Accessories Included parts Replacement Part numberAccessory Part number Included PartsReference Information, cont’d Extron’s Warranty Central AmericaExtron Electronics. All rights reserved

FOX 2G Tx specifications

Extron Electronics, a leader in the field of advanced audiovisual solutions, has introduced the FOX 2G Tx, a cutting-edge transmitter designed to meet the ever-evolving demands of modern AV systems. This device is an essential component in Extron's FOX Series, which is renowned for its robust capabilities in extending HDMI signals over long distances while ensuring high-quality performance.

The FOX 2G Tx utilizes sophisticated technology to transmit uncompressed HDMI signals up to 330 feet over multimode fiber and up to 2,500 feet over single-mode fiber. This unrivaled range allows for flexible installation options in a variety of applications, such as large auditoriums, control rooms, and educational settings. The transmitter supports HDMI 2.0, accommodating resolutions up to 4K at 60 Hz with 4:4:4 chroma subsampling. This feature is crucial in preserving image quality, making it ideal for high-definition video content and presentations.

One of the standout features of the FOX 2G Tx is its support for HDCP 2.3, ensuring compatibility with the latest digital content protection standards. This guarantees that users can transmit protected content without issues. Additionally, the device supports deep color, 3D, and multi-channel audio formats including Dolby TrueHD and DTS-HD Master Audio, providing a comprehensive multimedia experience.

Another distinguishing characteristic of the FOX 2G Tx is its simplicity in installation and operation. The device is designed with a compact form factor and includes mounting options, making it easy to integrate into existing AV systems. Furthermore, it is equipped with an intuitive status LED that provides real-time feedback on signal presence and operational status, allowing for quick troubleshooting and maintenance.

For enhanced flexibility, the FOX 2G Tx features a built-in EDID emulator. This ensures that the source device and display maintain optimal signal quality by preserving the correct metadata for each connected device. The use of fiber optic technology also contributes to superior immunity against electrical interference, resulting in a stable signal transmission, even in environments with high electromagnetic interference.

In summary, the Extron FOX 2G Tx is a versatile and powerful transmitter that excels in delivering high-quality HDMI signals over long distances. With its advanced features, compatibility with the latest standards, and user-friendly design, it is a go-to solution for professional AV installations seeking reliability and performance. Whether in corporate, educational, or entertainment settings, the FOX 2G Tx stands out as a key component in modern audiovisual setups.