Haier WDNS045, WDNSC145 Unpacking, Assembly Instructions, Proper Location, Cold water faucets

Page 7

English

UNPACKING

1.Remove all packing materials. This includes the foam base and all adhesive tape holding the accessories inside and outside.

2.Inspect and remove any remaining packaging, tape and printed material before turning on the water dispenser.

Note: Allow the water dispenser to stand in an upright position for at least10 hours before turning on the power.

Proper Location

•To ensure that your water dispenser works at the maximum efficiency it was designed for, you should install it in a location where there is proper air circulation and electrical connections.

•The following are the recommended clearances around the water dispenser.

Sides 2"

(50mm)

Back 4"

(100mm)

•Do not install your water dispenser in any location that is not properly insulated or heated because the unit is not designed to operate in room temperature below 55˚F / 13˚C. The water dispenser is for indoor use only. Room temperature should not exceed 97° F / 36° C.

Note: The built-in thermostat maintains the hot and cold temperatures automatically. On the com- pressor cooled water coolers the hot water temperature will be between 185˚- 201.2˚ F/ 85˚- 94˚ C and the cold water temperature will be between 39.2˚- 50˚ F/ 4˚-10˚ C.

• Select a suitable location for the unit on a hard even surface away from direct sunlight and heat sources (e.g., radiators, baseboard heaters, cooking appliances, etc.)

Note: Hot and cold water will not be instantly available as the unit will need time to heat up and cool down the water.

CAUTION: DO NOT plug in the water dispenser until water flows through both Hot and

Cold water faucets.

ASSEMBLY INSTRUCTIONS

Read carefully and understand all installation instructions before installing the water dispenser.

Installing Your Water Dispenser

Follow the steps below to install the water dispenser.

1.Remove the cap from the water bottle first. Lift up the water bottle and quickly place it into the water guard. (The water bottle is not included.)

2.DO NOT plug in the water dispenser until you have checked that water flows out of both the red and blue faucets when pressed. Never turn on the water dispenser without water in it. Doing so may cause the unit to catch fire or malfunction.

3.Check that water flows out by pressing both the red and blue water release buttons one at a time.

4.Plug the power cord into an 115volt / 60 Hz outlet.

5.To activate the water heater and cooler, turn ON the red and blue switches on the back of the unit. The hot & cold indicators in the front will be lit.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents WDNS045 Quality n Innovation n StyleSafety Precautions Table of Contents WDNS045 WDNS055 Part and FeaturesWDNSC145 WDNS201SS Proper Location Assembly InstructionsInstalling Your Water Dispenser UnpackingForelock Assembly of Storage CompartmentExtension Cords Wiring RequirementsPower Interruptions Grounding InstructionsOperating Your Water Dispenser Proper Care and Cleaning For Long Vacations or Absences / Moving Cleaning the Condenser CoilsIf the compressor is running non-stop Troubleshooting GuideIf water dispenser operation is noisy If the condenser becomes too hotIf water is dripping from the dispenser onto the floor If water leaks from the tapMonths labor carry-in only Months parts What is covered and for how long?What will be done? 115V, 60Hz Made in China Fabriqué en Chine Hecho en China Do Not Return This Product To The Store

WDNS045, WDNS055, WDNS201SS, WDNSC145 specifications

Haier is a renowned name in home appliances, particularly known for its innovative and efficient refrigeration solutions. Among their popular products, the Haier wine coolers, including the WDNS201SS, WDNS045, WDNSC145, and WDNS055, stand out for their functionality and user-friendly designs. These models cater to the needs of wine enthusiasts, offering optimal storage conditions and showcasing modern technology.

The Haier WDNS201SS features a sleek, stainless steel design that not only adds elegance to any space but also ensures durability. With a capacity of 20 bottles, it provides adequate storage for a small collection. The dual-zone temperature control technology allows for the simultaneous storage of red and white wines at their respective ideal temperatures. The touch controls provide easy adjustments, while the LED lighting elegantly illuminates the interior, making it easy to view your collection.

Similarly, the Haier WDNS045 is designed for compact areas, storing up to 45 bottles. This model also features dual temperature zones, ranging from 41°F to 65°F, allowing wine lovers to customize conditions for various types of wine. The wooden shelves add a classic touch and reduce vibrations, which can adversely affect the quality of wine. Its energy-efficient design ensures that the cooler operates quietly, making it perfect for both home and office settings.

The WDNSC145 is a slightly larger option, accommodating 145 bottles. This cooler also boasts a sleek design and emphasizes cooling efficiency with its smart cooling technology. It is designed with an adjustable temperature range, giving users precise control, and features a digital display for easy monitoring. This model emphasizes air circulation and humidity control, which plays a crucial role in preserving the integrity of wine over time.

Finally, the Haier WDNS055 combines style and functionality, offering a compact solution for those who wish to store up to 55 bottles. This model provides an optimal blend of aesthetic appeal and practical use. Featuring a tempered glass door, users can showcase their wine collection while maintaining temperature stability. Like other models, it provides dual temperature zones to cater to diverse wine types.

Overall, Haier’s wine coolers, including the WDNS201SS, WDNS045, WDNSC145, and WDNS055, are marked by their advanced features, energy efficiency, and elegant designs. Each model meets the needs of different consumers, ensuring that wine is stored under ideal conditions for maximum enjoyment. With these coolers, Haier continues to establish itself as a leader in home refrigeration technology.
Top Page Image Contents