Extron electronic P/2 DA12 Series, P/2 DA8 user manual Rack mounting procedures

Page 13

overloading might have on overcurrent protection and supply wiring. Give appropriate consideration to the equipment nameplate ratings when addressing this concern.

5. Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (such as the use of power strips).

Rack mounting procedures

The units can be rack mounted, using the MBD 149 mounting kit (part #70-077-03) provided with the unit.

1.Remove rubber feet if these have been installed on the bottom of the unit.

2.Secure one bracket to each side of the distribution amplifier with the provided bracket mounting screws (four #8 screws for each bracket — see figure 1 below).

MBD 149 Bracket

FRONT

Rack mounting screws

Bracket mounting screws

Figure 2-1 — Installing a full rack unit on a shelf rack

3.Align the holes in the mounting brackets with holes in the rack and secure the unit with brackets to the rack using the four rack-mounting screws and four washers provided with the mounting kit.

P/2 DA8 and P/2 DA12 • Installation and Operation

2-3

Page 12 Page 14
Image 13
Page 12 Page 14
Contents VGA Distribution Amplifiers DA8 and P/2 DA12 SeriesSafety Instructions English PrecautionsFCC Class a Notice 安全须知 中文Page Table of Contents Table of Contents, cont’d DA8 and P/2 DA12 Series OneAbout This Manual IntroductionDescription of P/2 DA8 and P/2 DA12 Series Wide range of compatible signal types and resolutions Features of P/2 DA8 and P/2 DA12 SeriesIntroduction, cont’d Two Installation Overview Installation and OperationTabletop placement Mounting the Distribution AmplifierInstalling a full rack unit on a shelf rack Rack mounting proceduresUnder-desk mounting Installation and Operation, cont’dDA8 and P/2 DA12 Installation and Operation Front panel features Installation and Operation, cont’d Front Panel FeaturesSee Rear Panel FeaturesSwitch Function Sync Impedance ohms Off Sync impedance switchesVideo Connections Video Input and Output ConnectionsAudio output Audio inputUnbalanced Stereo Output Mute ControlInstallation and Operation, cont’d Troubleshooting AAppendix a Reference Information SpecificationsVideo Video InputRgbs SyncAudio P/2 DA8 A, P/2 DA12 a Reference Information, cont’dAudio Input P/2 DA8 A, P/2 DA12 a Audio Output P/2 DA8 A, P/2 DA12 aGeneral Accessories Part number Optional accessories and cablesReference Information, cont’d Included Parts Included Parts Part numberDA8 and P/2 DA12 Reference Information Reference Information, cont’d FCC Class a Notice Extron’s WarrantyExtron Electronics, Europe Beeldschermweg 6C
Related manuals
Manual 2 pages 30.64 Kb

P/2 DA12 Series, P/2 DA8 specifications

Extron Electronics is a renowned company recognized for providing innovative and high-quality AV (audiovisual) solutions. Among their extensive range of products are the P/2 DA12 and P/2 DA8, which are designed to enhance video distribution in various environments. These distribution amplifiers are particularly favored in commercial settings like conference rooms, educational facilities, and control centers.

The P/2 DA12 offers twelve outputs, while the P/2 DA8 features eight outputs, allowing for flexible video distribution from a single input source. Both models support resolutions up to 1920x1200, ensuring compatibility with a wide range of display devices such as projectors, monitors, and TVs. This high-quality video output is essential for maintaining the clarity and detail required in professional presentations and high-stakes environments.

One of the standout features of the P/2 DA series is Extron's advanced signal processing technology. This includes Automatic Cable Equalization, which compensates for signal loss over extended distances, ensuring that the video quality remains consistent even when using long cable runs. The P/2 DA amplifiers also integrate Extron's unique 4k-capable circuitry, making them ready for future-proofing as AV technology continues to evolve.

Furthermore, both models are equipped with individual gain controls for each output. This feature allows users to optimize the signal strength delivered to each display, accommodating different cable lengths and equipment configurations. The amplifiers also provide comprehensive status LED indicators that enable easy monitoring of device functionality and signal status, a crucial aspect in professional setups.

Reliability is another significant characteristic of the P/2 DA12 and P/2 DA8. These devices are built with robust construction, ensuring durability in demanding environments. They also feature universal power supplies that work globally, facilitating seamless integration into various installations without the need for additional converters.

Finally, installation is streamlined with the inclusion of a compact design, making it easy to mount in racks or on surfaces without occupying much space. The P/2 DA12 and P/2 DA8 are versatile solutions, enabling effective video distribution and enhancing the overall multimedia experience in any professional setting.
Top Page Image Contents