Extron electronic P/2 DA8 Sync impedance switches, Switch Function Sync Impedance ohms Off

Page 18

Installation and Operation, cont’d

Operation

After the distribution amplifier and its connected devices are powered up, the system is fully operational. If any problems occur, ensure that the cables are properly routed and connected.

Sync impedance switches

To solve laptop compatibility issues on the video input, or reflection problems on the video output, use these dip switches to correct for sync impedance mismatches.

SYNC IMPEDANCE

1 2 3 4 5 6 7

ON

ON

 

 

 

 

 

 

OFF

1

2

3

4

5

6

7

 

Switch 1 (sync input impedance) — The default setting is OFF (510 ohms). If the image from the laptop is unstable, slide the DIP switch ON (10k ohms).

Switches 2-7 (sync output impedance) — Each of these switches controls a pair of outputs simultaneously (see table below). The default setting is OFF (50 ohms). If the front LED is green and all the input and output cables are connected correctly, but there is no image on the display, slide the switch to ON (75 ohms).

Switch

Function

Sync Impedance (ohms)

On

Off

 

 

1

2

3

4

5

6

7

Input sync

10,000

Output 1 & 2 sync

75

Output 3 & 4 sync

75

Output 5 & 6 sync

75

Output 7 & 8 sync

75

Output 9

& 10 sync

75

Output 11

& 12 sync

75

 

 

 

510

50

50

50

50

50

50

NSwitches 6 and 7 are only available on P/2 DA12 models.

2-8 P/2 DA8 and P/2 DA12 • Installation and Operation

Image 18
Contents DA8 and P/2 DA12 Series VGA Distribution AmplifiersPrecautions Safety Instructions English安全须知 中文 FCC Class a NoticePage Table of Contents Table of Contents, cont’d One DA8 and P/2 DA12 SeriesIntroduction About This ManualDescription of P/2 DA8 and P/2 DA12 Series Features of P/2 DA8 and P/2 DA12 Series Wide range of compatible signal types and resolutionsIntroduction, cont’d Two Tabletop placement Installation and OperationInstallation Overview Mounting the Distribution AmplifierRack mounting procedures Installing a full rack unit on a shelf rackInstallation and Operation, cont’d Under-desk mountingDA8 and P/2 DA12 Installation and Operation Installation and Operation, cont’d Front Panel Features Front panel featuresRear Panel Features SeeSync impedance switches Switch Function Sync Impedance ohms OffVideo Input and Output Connections Video ConnectionsAudio input Audio outputMute Control Unbalanced Stereo OutputInstallation and Operation, cont’d Troubleshooting AAppendix a Video SpecificationsReference Information Video InputSync RgbsAudio Input P/2 DA8 A, P/2 DA12 a Reference Information, cont’dAudio P/2 DA8 A, P/2 DA12 a Audio Output P/2 DA8 A, P/2 DA12 aGeneral Reference Information, cont’d Included Parts Optional accessories and cablesAccessories Part number Included Parts Part numberDA8 and P/2 DA12 Reference Information Reference Information, cont’d Extron’s Warranty FCC Class a NoticeExtron Electronics, Europe Beeldschermweg 6C
Related manuals
Manual 2 pages 30.64 Kb

P/2 DA12 Series, P/2 DA8 specifications

Extron Electronics is a renowned company recognized for providing innovative and high-quality AV (audiovisual) solutions. Among their extensive range of products are the P/2 DA12 and P/2 DA8, which are designed to enhance video distribution in various environments. These distribution amplifiers are particularly favored in commercial settings like conference rooms, educational facilities, and control centers.

The P/2 DA12 offers twelve outputs, while the P/2 DA8 features eight outputs, allowing for flexible video distribution from a single input source. Both models support resolutions up to 1920x1200, ensuring compatibility with a wide range of display devices such as projectors, monitors, and TVs. This high-quality video output is essential for maintaining the clarity and detail required in professional presentations and high-stakes environments.

One of the standout features of the P/2 DA series is Extron's advanced signal processing technology. This includes Automatic Cable Equalization, which compensates for signal loss over extended distances, ensuring that the video quality remains consistent even when using long cable runs. The P/2 DA amplifiers also integrate Extron's unique 4k-capable circuitry, making them ready for future-proofing as AV technology continues to evolve.

Furthermore, both models are equipped with individual gain controls for each output. This feature allows users to optimize the signal strength delivered to each display, accommodating different cable lengths and equipment configurations. The amplifiers also provide comprehensive status LED indicators that enable easy monitoring of device functionality and signal status, a crucial aspect in professional setups.

Reliability is another significant characteristic of the P/2 DA12 and P/2 DA8. These devices are built with robust construction, ensuring durability in demanding environments. They also feature universal power supplies that work globally, facilitating seamless integration into various installations without the need for additional converters.

Finally, installation is streamlined with the inclusion of a compact design, making it easy to mount in racks or on surfaces without occupying much space. The P/2 DA12 and P/2 DA8 are versatile solutions, enabling effective video distribution and enhancing the overall multimedia experience in any professional setting.