Dispenser operation
Dispenser operation
Choose crushed ice, refrigerated water or ice cubes. Slightly push a glass against the ice/water lever as shown in the illustration.
(1) Dispensing crushed ice
Press the appropriate button so that the indicator for crushed ice lights up.
Lightly press against the lever so that crushed ice is supplied.
(2) Dispensing ice cubes
Press the appropriate button so that the indicator for ice cubes lights up.
Lightly press against the lever so that ice cubes are supplied.
(3) Dispensing refrigerated water
Press the appropriate button so that the indicator for refrigerated water lights up. 
Lightly press against the lever so that refrigerated water is supplied.
Dispensing crushed ice
Even with the ice cube option selected, some crushed ice may be supplied simultaneously. It is also possible that the crushed ice supply is mingled with a few ice cubes.
When crushed ice is frequently called for, it is normal for frost to build up around the outlet, but it will eventually evaporate.
Keep the glass close to the dispenser to prevent ice from spilling.
Dispensing refrigerated water
Due to air in the water supply line, refrigerated water may not be available immediately after installation. In this case, hold the dispenser lever pressed in for as long as two minutes to evacuate any remaining air.
After that, the supplied water will become increasingly cooler.
Refrigerated water does not contain any ice cubes. To lower the temperature of the refrigerated water, add crushed ice or ice cubes to it.
Caution: Keep fingers and objects away from the dispenser.
29