Beverage dispenser
The beverage dispenser is installed on the refrigerator door.
Beverage dispenser
Loading and operating
1. Loading
Remove the lid of the dispenser compartment, invert the bottle of water or other liquid and place in position and then refit the lid. (Temperature of the drinking water or beverage added into the dispenser compartment must not be higher than ambient temperature.)
When the water tank is refit or cleaned, remove the pipe on the lid of water tank and then the water tank. After filling or cleaning, refit the lid and insert the pipe into the water tank and finally place the tank in position.
Water bottle
Lid
Water inlet
Water duct
12