Haier HRF-265F manual Cleaning

Page 24
Cleaning

Cleaning

Cleaning

The refrigerator should be cleaned regularly to prevent the formation of bad odors.

*Disconnect the power before cleaning the refrigerator.

*Clean the refrigerator with soft towel or sponge wet with warm water. (mild detergent)

Caution: Do not use a hard brush, steel brush, detergent, gasoline or other solvents, hot water, acid or alkali for cleaning.

* Dry the surface of the refrigerator with a soft cloth.

Caution:Do not use excessive amounts of water for cleaning the refrigerator. Use a dry cloth to clean the switch and the lamp.

*Clean the back and sides of the refrigerator regularly.

*Always keep the door gasket clean.

22

Image 24
Contents Page Page Page IMPORTANT SAFETY INFORMATION This Built in model-HRF-265F Installation instruction Contents Refrigerator diagramDefrosting,Cleaning and Cesstion Questions and AnswersCautions Safety Instructions and WarningsDisposal of the old appliance Disposal of the packaging of your new applianceof explosion Refrigerator Diagram Location anti-clockwise Adjustable Foot Spanner clockwise6cm 6cm OKCheck attached accessories and materials QKClean the refrigerator before usingPreparation NKUnpackingiÉÑíLoáÖÜí=aççê=léÉåáåÖ Page 2 Power indicator 3 Temperature settings1 Control panel 4 Over temperature warning and buzzer release5 Error indication Temperature sensors are installed in the refrigerator and the freezersensor 1 Connect the refrigerator to the power supply 2 Temperature settingOperation 3 Loading the foodPage Storage of Sorted Food Suggestions Page Making Ice Do not load excessive foodcapacity of the freezer. refer to the requirements on the rating plateHot food should not be stored in the freezer, wait until it has cooled down to room temperature Defrosting Cleaning CleaningPower failure CessationOperation cessation During Vacations Moving the refrigeratorCautionnever place the refrigerator horizontally Questions and Answers Following circumstances are not problemsPage Excessive vibration is caused by the following circumstances Page Technical data