Haier HRF-265F manual Control panel, Power indicator, Temperature settings

Page 14
1 Control panel

1 Control panel

When the appliance is connected to a power source, the green lamp (E) and the red overtemp warning lamp (G) illuminate.

B. Temperature setting

E. Power indicator (green)

C. Buzzer release

G. Over temperature indicator (red)

2 Power indicator

The power indicator will illuminate after the appliance is connected to the power source.

3 Temperature settings

Turn the temperature knob "B" to set the temperature of the refrigerator. Higher mumbers

are for lower temperatures.Use the provided flat blade key to adjust the control.

4 Over temperature warning and buzzer release

When the actual temperature sensed is above the set point, the over temperature warning indicator G will blink accompanied by a buzzing. Check to see if the refrigera- tor door is properly closed or if the refrigerator is first operated. When the temperature in the freezer compartment falls to the desired value, the red over temperature-warn- ing indicator will automatically extinguish. When the refrigerator is first used, the indi- cator G illuminates.

Pressing the button C will cease the activated over-temp buzzer. When the temperature in the freezer falls down below -52 Power indicator, the over-temp warning indicator will extinguish

12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page Page Page IMPORTANT SAFETY INFORMATION This Built in model-HRF-265F Installation instruction Defrosting,Cleaning and Cesstion ContentsRefrigerator diagram Questions and AnswersDisposal of the old appliance CautionsSafety Instructions and Warnings Disposal of the packaging of your new applianceof explosion Refrigerator Diagram 6cm 6cm Locationanti-clockwise Adjustable Foot Spanner clockwise Preparation OKCheck attached accessories and materialsQKClean the refrigerator before using NKUnpackingiÉÑíLoáÖÜí=aççê=léÉåáåÖ Page 1 Control panel 2 Power indicator3 Temperature settings 4 Over temperature warning and buzzer releasesensor 5 Error indicationTemperature sensors are installed in the refrigerator and the freezer Operation 1 Connect the refrigerator to the power supply2 Temperature setting 3 Loading the foodPage Storage of Sorted Food Suggestions Page capacity of the freezer. refer to the requirements Making IceDo not load excessive food on the rating plateHot food should not be stored in the freezer, wait until it has cooled down to room temperature Defrosting Cleaning CleaningOperation cessation Power failureCessation Cautionnever place the refrigerator horizontally During VacationsMoving the refrigerator Questions and Answers Following circumstances are not problemsPage Excessive vibration is caused by the following circumstances Page Technical data
Top Page Image Contents