Extron electronic P/2 DA2 EC F Installing architectural adapter plates, Installing adapter plates

Page 12

Controls and Installation, cont’d

Balanced audio

To attach the distribution amplifier to a balanced audio system, do the following:

1.Attach the audio cable to a balanced speaker input connector (tip, ring, and sleeve).

Tip (L)

Ring (R)

Sleeve ()

2.Attach the audio cable to the audio cable connector (Extron part number 10-319-10). Fasten the captive screws inside the audio cable connector as shown below.

Tip

Ring

Left

AUTO

POWER

 

AUDIO

100%

 

UNITY

INPUT

50%

 

GAIN/PEAKING

BUFFERED

LOCAL

ID

PIN 4

ID

MONITOR

PIN

11

Adapter Plate

 

 

#4-40 Nut w/ Captive

 

 

Washer

 

 

P/2 DA2 WM F AAP

 

 

(up to 4 plates)

P/2

DA2

WM F

 

 

 

 

 

AAP

Sleeve(s)

Tip

Right

Ring

 

Balanced Output

3.Slide the audio cable connector into the audio output connector on the distribution amplifier.

Installing architectural adapter plates

The P/2 DA2 WM F AAP may have up to four optional adapter plates and the P/2 DA2 WM F AAP EC can have up to three adapter plates. The adapter plates provide a convenient method of adding various connectors for specific audio and video requirements. The adapter plates must be ordered separately and must be attached to the faceplate and cabled before attaching the WM F AAP model to the wall mount bracket or the EC F AAP model to the Euro Channel.

1.Insert the adapter plate captive screws through the front faceplate holes. Secure the adapter plate using the supplied washers and nuts.

 

P/2 DA2 WM F AAP EC

 

 

AUTO POWER

 

GAIN/

ID PINS

P/2 DA2 WM F AAP EC

PEAKING

UNITY 100% 50%

 

(up to 3 plates)

 

 

Installing adapter plates

2.Attach the output cables to the back side of the adapter plate. Some adapter plates may require that conductors be soldered to the connectors. Attach foil and braided shields to ground connections.

2-12 P/2 DA2 WM/EC/D/AAP Series • Controls and Installation

P/2 DA2 WM/EC/D/AAP Series • Controls and Installation 2-13

Page 11 Page 13
Image 12
Page 11 Page 13
Contents DA2 WM F, WM EC F DA2 D, and AAP models Distribution AmplifiersPrecautions DA2 WM Series, EC, & D Controls and Installation Table of Contents Table of Contents, cont’d OneFeatures About the P/2 DA2 WM F/EC F, AAP, and D ModelsDA2 WM F faceplate features DA2 WM EC F faceplate featuresDA2 D faceplate features Front and Rear PanelsControls and Installation, cont’d DA2 WM F/EC F rear connectorsDA2 WM F/EC F rear panel DA2 D rear panel Installing the P/2 DA2 WM F/EC F Easy setup procedure MediumInstalling the mud ring bracket Installing a mud ring bracketConnecting audio output CablingDA2 WM F cabling Fastening captive screwsInstalling architectural adapter plates Installing adapter platesDA2 WM F wall mount installation DA2 WM EC F Euro Channel installationSetting the DIP switches Euro Channel installationInstalling the P/2 DA2 D Setting the internal jumpersPreparing the site and installing the wall box Setting the internal jumpersMounting the distribution amplifier Attaching the wall box to a wall studMounting the distribution amplifier to the wall box Replacing the faceplate DA2 D application exampleSpecifications VideoVideo input Video outputSpecifications, Dimensions, Parts, cont’d AudioAudio input Audio outputSpecifications, Dimensions, and Parts, cont’d DimensionsDA2 WM F faceplate dimensions WM F model faceplate dimensionsWM F AAP model faceplate dimensions Model faceplate dimensionsIncluded Parts CablesMud ring mounting brackets Optional architectural adapter platesSingle Type Connector Architectural Adapter Plates DA2 WM F DA2 WM F AAP mounting template DA2 D mounting template18 P/2 DA2 WM/EC/D/AAP Series Appendix

WM EC F, P/2 DA2 WM EC F, P/2 DA2 D, P/2 DA2 EC F specifications

Extron Electronics is a renowned manufacturer of advanced audiovisual (AV) solutions, providing high-quality distribution and control systems for various environments. Among their extensive product range, the P/2 DA2 EC F, P/2 DA2 WM EC F, WM EC F, and P/2 DA2 D models stand out for their exceptional performance and innovative technologies.

The P/2 DA2 EC F is a premium video distribution amplifier designed for balancing and distributing high-resolution video signals. One of its main features includes support for resolutions of up to 1080p, ensuring sharp and clear image quality over long distances. The unit incorporates Extron's proprietary technologies, such as Extron's Brightness and Contrast Enhancement, which help to optimize picture quality by improving brightness levels, contrast ratios, and overall color fidelity. Additionally, the P/2 DA2 EC F offers a user-friendly design, with easy-to-use front panel controls and a compact form factor that simplifies installation in various AV setups.

Similarly, the P/2 DA2 WM EC F is a wall-mountable version of the video distribution amplifier, catering to installations where space is limited. This feature enables efficient use of wall space without compromising on performance. Like its counterpart, it supports high-definition video signals and ensures the integrity of audio-visual content, making it a reliable choice for classrooms, conference rooms, and other professional settings.

The WM EC F model, designed specifically for ease of integration within wall-mounted applications, further emphasizes user convenience through its lightweight design and compact nature. It is compatible with various mounting systems and provides convenient access for maintenance, making it suitable for environments with heavy AV usage.

On the other hand, the P/2 DA2 D is a distinct product that features dual output capabilities, making it ideal for distributing video signals to two separate display devices simultaneously. With high bandwidth and excellent signal integrity, it ensures a seamless experience across multiple displays. The robust design accommodates various installation environments, including video conferencing, digital signage, and more, without any loss in resolution or quality.

Overall, Extron's P/2 series, including the DA2 EC F, DA2 WM EC F, WM EC F, and DA2 D, showcases advanced engineering in video distribution technology, offering versatile solutions tailored to meet the needs of modern AV installations. With their high performance, rich features, and user-centric design, these products continue to be essential tools for professionals in the audiovisual field.
Top Page Image Contents