Projector mounting

Installation and Operation, cont’d

1.Loosely attach the mounting brackets to the unit using the four machine screws and washers supplied with the mounting kit.

2.Hold the distribution ampliﬁer against the inside of the surface through which it will be mounted. Mark the four screw holes on the inside of the surface to which you are mounting the device.

3.Drill four pilot holes, each 3/32" in diameter by 1/4" deep, where you made marks.

4.Using the four wood screws provided, secure the brackets to the mounting surface.

5.Slide the unit up and down in the mounting brackets until the face of the unit is at the desired height. Tighten the screws that secure the bracket in place.

If the screws are inaccessible to a screwdriver:

a.Mark the location of the brackets relative to the screws.

b.Remove the P/2 DA2xi from inside the furniture.

c.Tighten the screws.

d.Replace the unit inside the surface (step 4).

Rear Plate

Extron

P/2 DA2xi

U-bolt

Extron

PMK 350

Multi-product Projector

Mounting Kit

Front Plate

Cover Sheet

Projector mounting the P/2 DA2xi using the PMK 350 Projector Mount Kit

6P/2 DA2xi • Installation and Operation

The PMK 350 Low Proﬁle Projector Mount Kit is an above- projector mounting kit that attaches to a 1" to 2" diameter projector mounting pole. It can hold more than one device, in a variety of sizes. The PMK 350 is available in black (part #70-563-02) or white (part #70-563-03).

Follow these steps to mount the P/2 DA2xi on the PMK 350 bracket as follows:

1.Remove the front and back panels from the

PMK 350, using an Extron Tweeker or other small Philips screwdriver. (Retain the screws to reattach the plates when you are ﬁnished.)

2.Remove any rubber feet from the bottom of the P/2 DA2xi.

3.Secure the P/2 DA2xi to one side of the mounting bracket, using two of the supplied 4-40 x 3/16" screws in opposite (diagonal) corners.

4.Using the two included tie wraps, strap the P/2 DA2xi power supply to the PMK 350 bracket.

5.Place the bracket around the projector ceiling mounting pole as shown in the previous illustration.

6.Place the rubberized contoured base against the pole and opposite the back plate. The pole should ﬁt snugly into the depression in the center of the contoured base.

7.Align the two slotted holes in the bottom of the L-shaped bracket with the two slotted holes in the base of the PMK 350, on either side of the opening for the pole. Attach the L-bracket to the base by inserting two provided 6-32 x 5/16" screws through the aligned slots.

8.Insert the two legs of the provided square U-bolt through the following parts in the order they are listed below:

a.The slotted holes on the back side of the bracket mount plate

b.The round holes in the rubberized contour base

c.The round holes in the L-shaped bracket

•For a typical (1.5" to 2.0" diameter) pole — You can use the supplied square U-bolt, which ﬁts a typical ceiling pole.

•For a smaller pole — Locally obtain a square U-bolt that ﬁts your ceiling pole. The slotted holes on the bracket can accommodate a square U-bolt for pole sizes from 1.0" to 2.0" in diameter.

9.Move the PMK 350 up to the desired location on the ceiling pole, as close to the ceiling as desired.

P/2 DA2xi • Installation and Operation

P/2 DA2XI specifications

The Extron P/2 DA2xi is a high-performance distribution amplifier designed to meet the needs of professional audio-visual applications. This device is built to distribute a single input signal to multiple outputs without loss of quality or integrity, making it an essential tool in classrooms, conference rooms, and other AV environments.

One of the key features of the P/2 DA2xi is its ability to handle a range of video formats, including composite video, S-video, and component video. This versatility ensures compatibility with various AV equipment, allowing for seamless integration into existing setups. The unit offers two identical outputs, each capable of driving long cable runs without compromising signal quality.

The P/2 DA2xi employs Extron's advanced circuitry to provide excellent signal performance. It includes features like automatic gain control and equalization, ensuring that the output signals maintain consistent quality, regardless of the input source or cable length. This is particularly useful in complex AV systems where different source devices may introduce varying levels of signal strength.

Another standout characteristic of the P/2 DA2xi is its robust build quality. The device is housed in a compact yet durable metal enclosure, designed to withstand the rigors of professional use. It is also equipped with user-friendly features, such as LED indicators for power and signal presence, making it easy for operators to monitor performance at a glance.

Installation and operation are simplified with the P/2 DA2xi, thanks to its intuitive layout and straightforward connections. The unit features standard BNC connectors, which are commonly used in the industry, ensuring easy integration into existing AV setups. Its compact design allows for flexible placement, whether it be rack-mounted or placed on a shelf.

In terms of technology, the P/2 DA2xi incorporates Extron's proprietary technologies, which are designed to enhance signal integrity and reliability. Its robust design minimizes the risk of interference and ensures optimal performance, making it suitable for a variety of applications, including corporate presentations, educational environments, and large venues.

In conclusion, the Extron P/2 DA2xi distribution amplifier is a versatile, high-performance solution for managing video signals in professional settings. Its array of features, combined with advanced technologies, make it an invaluable asset for ensuring clear and reliable video distribution across multiple outputs. Whether for simple applications or more complex AV systems, the P/2 DA2xi stands out as a leading choice in the market.