Extron electronic P/2 DA2XI user manual Cabling 15-pin HD Connections, Cabling BNC Connections

Page 8

Installation and Operation, cont’d

10.Secure the L-shaped bracket to the square U-bolt using the included hex nuts, washers, and lock washers. Tighten the hex nuts securely.

NBe sure to tighten the hex nuts securely enough that the PMK 350 does not slide down the ceiling pole. A socket wrench is recommended to tighten the hex nuts.

11.Secure the front panel to the mounting tray with four of the included #6 screws.

12.If desired, choose one of the provided four sizes of self- adhesive cover sheets, and apply it to the underside of the mounting tray.

Cabling 15-pin HD Connections

1.Power off the computer and its local monitor.

2.Connect the computer’s VGA output to the “Input” of the distribution amplifier. See Front Panel Features.

3.Connect the computer’s monitor to the “Local Monitor” output and connect the display device to the "Output" of the distribution amplifier. See Rear Panel Features. Set the DIP switches for the input and output impedance, and set the gain/peaking DIP switch for the "Output" device.

4.Plug in the distribution amplifier's power supply and power on the local monitor, computer, and display device.

Cabling BNC Connections

Use an Extron SY adapter to connect the P/2 DA2xi's

15 HD VGA output to a display device's 5 BNC connectors.

RGBHV

VGA

Front Panel Features

INPUT

12

a Power LED indicator

Green LED = power and signal

Amber LED = power but no signal

Off = no power

b Input connector — Connect the computer's VGA output to the 15-pin HD female connector.

Rear Panel Features

P/2 DA2xi

LOCAL MONITOR

ON 1 2 3

OUTPUT

12V

 

0.2A MAX

ON

 

 

 

 

1

2

3

 

 

OFF

 

 

 

1 2 3 4

a Power supply — Connect the included external 12 VDC , 1 A power supply to the 2-pole 3.5 mm captive screw connector. Be careful to observe the correct polarity. See Power supply wiring in the following section for wiring instructions.

b Local Monitor connector — Connect the computer's monitor to the 15-pin HD connector.

c DIP Switches

Switch 1 (sync input impedance) – Default setting is down (510 ohms). If the image from a laptop computer becomes unstable, slide the switch up (10k ohms).

Switch 2 (sync output impedance) – Default setting is up

(50 ohms). If the front LED is green and all the input and output cables are OK, but there is no image at the projector, slide the switch down (75 ohms).

Switch 3 (video gain/peaking) – Slide the switch down (off) if the output cable length is under 100' (30 m). Slide the switch up (on) if the output cable length is over 100' (30 m).

NThe gain/peaking switch does not affect the Local Monitor output.

8

P/2 DA2xi • Installation and Operation

P/2 DA2xi • Installation and Operation

9

Image 8
Contents DA2xi Extron’s Warranty FCC Class a Notice Features DescriptionOptional mounting Installation and Operation, cont’d Mounting the P/2 DA2xiTabletop placement Through-furniture mounting Installation and Operation, cont’dUnder-furniture mounting Projector mounting Front Panel Features Rear Panel FeaturesCabling 15-pin HD Connections Cabling BNC ConnectionsPower supply wiring OperationInstallation and Operation, cont’d Specifications Mounting accessories AccessoriesIncluded Parts Cables
Related manuals
Manual 4 pages 40.57 Kb

P/2 DA2XI specifications

The Extron P/2 DA2xi is a high-performance distribution amplifier designed to meet the needs of professional audio-visual applications. This device is built to distribute a single input signal to multiple outputs without loss of quality or integrity, making it an essential tool in classrooms, conference rooms, and other AV environments.

One of the key features of the P/2 DA2xi is its ability to handle a range of video formats, including composite video, S-video, and component video. This versatility ensures compatibility with various AV equipment, allowing for seamless integration into existing setups. The unit offers two identical outputs, each capable of driving long cable runs without compromising signal quality.

The P/2 DA2xi employs Extron's advanced circuitry to provide excellent signal performance. It includes features like automatic gain control and equalization, ensuring that the output signals maintain consistent quality, regardless of the input source or cable length. This is particularly useful in complex AV systems where different source devices may introduce varying levels of signal strength.

Another standout characteristic of the P/2 DA2xi is its robust build quality. The device is housed in a compact yet durable metal enclosure, designed to withstand the rigors of professional use. It is also equipped with user-friendly features, such as LED indicators for power and signal presence, making it easy for operators to monitor performance at a glance.

Installation and operation are simplified with the P/2 DA2xi, thanks to its intuitive layout and straightforward connections. The unit features standard BNC connectors, which are commonly used in the industry, ensuring easy integration into existing AV setups. Its compact design allows for flexible placement, whether it be rack-mounted or placed on a shelf.

In terms of technology, the P/2 DA2xi incorporates Extron's proprietary technologies, which are designed to enhance signal integrity and reliability. Its robust design minimizes the risk of interference and ensures optimal performance, making it suitable for a variety of applications, including corporate presentations, educational environments, and large venues.

In conclusion, the Extron P/2 DA2xi distribution amplifier is a versatile, high-performance solution for managing video signals in professional settings. Its array of features, combined with advanced technologies, make it an invaluable asset for ensuring clear and reliable video distribution across multiple outputs. Whether for simple applications or more complex AV systems, the P/2 DA2xi stands out as a leading choice in the market.