English
3.If the weight input is not within 4~100, the input will be invalid. No "BEEP" will be sound and the unit will not work until valid numbers are input.
4.Press “START/+30SEC” to start defrosting and the cooking time remained will be displayed. ":", " 
" and " 
" indicators will flash and the "Oz" indicator will go out.
7. TIME DEFROST FUNCTION
1. Press “TIME DEFROST”, LED will display "dEF2". At the same time, " 
", " 
" indicators will be lighted.
2.Press number pads to input defrosting time. The effective time range is 00:01~99:99.
3.If the time input is not within 00:01~99:99, no "beep" will be sound and the unit will not work until valid numbers are input.
4.The default microwave power is power level 3. If you want to change the power level, press “POWER” once, and the LED will display "PL 3", then press the number pad of the power level you wanted.
5. Press “START/+30SEC” to start defrosting. The remained cooking time will be displayed. ":", " | " and " | " |
indicators will flash.
8. POPCORN
a) Default Mode
1.Press “POPCORN” to select popcorn mode, " 
" , " 
" and "Oz" are light. "1.75", "3.0", "3.5" appear in the LED.
2.Press “START/+30 SEC” to start cooking, the buzzer will ring once, "Oz" will go out, "
" , " 
" will flash.
3.When the cooking is over, the buzzer will ring 5 times, LED will display "0:00". If the clock be set
will display the current time.
b)
1.Press “POPCORN” to select popcorn mode, " 
", " 
" and "Oz" are light. "1.75", "3.0", "3.5" appear in the LED.
2.Press “MEMORY”, LED will display the cooking time of the weight, the minute figure is flashing.
3.Press the number keys and enter the time.
4.Press “MEMORY” to save the setting.If press “START/+30 SEC” directly, the oven will to cook with the amended cooking time. " 
" "•" " 
" will flash.
Users can change the cooking time
e.g.: Users set “POPCORN” time for 3 minutes and 15 seconds.
1.Press “POPCORN” button once or twice when in waiting states. (the LED will display "1.75" for once press and "3.0" for twice), then press “MEMORY” button, LED screen will display the default cooking time of current weight ( which is not 0:00 ), for example 1'30''. on the screen the first number 1 flashes, press number button to input 3; the second number 3 flashes, press number button to input 1; the third number 0 flashes, press number button to input 5.And then the first number 3 flashes again ( It is similar as clock setting ).
2.Press “MEMORY” again to save current setting. If press “START/+30 SEC” to begin cooking directly, the program will save the latest setting of cooking time automatically.
3.To change the set cooking time, repeat step 1), the screen will firstly display the saving time ( 3:15 for example ), press number button to reset cooking time, and the follow step 2).
4.When completed, whenever press “POPCORN” button, screen displays food deal 1.75, 3.0 or 3.5, only cooking time follows the saved time setting.
5.To go back to initialization, press “POPCORN” button for more than three seconds, the buzzer will sound once, then go back to initial setting.
9.POTATO
1.Press “POTATO” repeatedly until the number you wish appears in the display, "
","
" light. "1"SET : 1 potato (approximate 230 gram)
"2"SETS: 2 potatoes (approximate 460 gram)
"3"SETS: 3 potatoes (approximate 690 gram)
For example, press "POTATO" once : "1" displays.
2.Press “START/+30 SEC” to cook, " 
", " 
"are flashing, time counts down.
Times( Press "Potato") | Weight | Display |
|
|
|
Once | 1 set |
|
|
|
|
Twice | 2 set |
|
|
|
|
Thrice | 3 set |
|
|
|
|
9