Mounting the TLP 350MV, Using a Mud Ring

TLP 350MV • Setup Guide (Continued)

Mounting the TLP 350MV

Decide where to mount the TLP 350MV and whether to use a 3-gang mud ring or a 3-gang UL-certified junction box. The mounting instructions are slightly different depending on your choice:

Using a Mud Ring

1.Use the template provided with the mud ring to mark

the wall. For the mud ring provided, the hole must be

5 25/32 inches (14.68 cm) wide x 3 7/8 inches (9.83 cm) high.

2.Cut a hole in the wall. To avoid making the hole too big, cut

inside the lines you marked.

3. Test the fit by inserting the mud ring into the hole in the wall. If necessary, use a rasp or file to enlarge the hole.

4.Insert the mud ring into the hole and use a screw driver to

turn and tighten the locking arms until they clamp the mud ring to the mounting surface. Do not overtighten.

5.Secure the wall adapter (provided) to the junction box, using

the four screws (provided).	Mud Ring

6.Use the Extron removal tool provided to separate the bezel

from the TLP 350MV (see figure on previous page).	TLP 350MV

Locking Arms (4)

Clips (4)

Screws (2)

LAPTOP
PC
DV	D

CAM
DOC
	Y
AUXILIAR

Y ON DISPLA

Y OFF DISPLA

MUTE

7. Extron recommends using the provided Power over Ethernet (PoE) power supply. Connect a network switch to the "LAN In" port and run a second cable

from the "Pwr LAN Out" port to the Touch Panel mounting site (see the figure below).	Bezel

CAUTION: Whether you use a PoE power supply or a 12 VDC power supply (not provided), you must read the caution in the Power Supply section of the TLP 350MV User Guide.

NOTE: If both a PoE power supply and a 12 VDC power supply are present, the unit will draw power from the PoE power supply only.

8.Run video cables with to the mounting site. Leave enough slack in the cables to connect them to the TLP 350MV. Pull the cables through the mud ring. Connect the cables as shown in the diagram below.

9.Plug the cables into the rear panel connectors of the TLP 350MV (refer the TLP 350MV User Guide).

10.Secure the TLP 350MV to the mud ring using the two screws provided (top center and bottom center).

11.Do not replace the bezel at this time. You will need access to the recessed Menu and Reset buttons to configure the unit.

C (yellow cable)

Video/Y (white cable)

Power over Ethernet (PoE) Power Supply

PWR LAN-OUT

LAN-IN

To TLP 350MV

To Network Switch

TLP 350MV specifications

The Extron TLP 350MV is a cutting-edge touchpanel designed to facilitate intuitive control over AV systems, making it an ideal choice for educational, corporate, and commercial applications. Known for its robust capabilities and user-friendly interface, the TLP 350MV provides a seamless way to manage audio and video resources effectively.

One of the standout features of the TLP 350MV is its brilliant 3.5-inch color touchscreen display. The high-resolution display offers vibrant colors and sharp visuals, enabling users to easily navigate through various control options. The responsive capacitive touch technology ensures that interactions are smooth and accurate, resulting in a fluid user experience.

The TLP 350MV is equipped with an Ethernet port, which enables it to connect directly to a network. This connectivity feature allows for remote operation and integration with Extron’s Global Configurator software, making it possible to customize configurations and control various devices within the AV system. Users can create personalized interfaces tailored to specific applications or room layouts, ensuring optimal functionality.

Another key characteristic of the TLP 350MV is its PoE (Power over Ethernet) capability. This technology allows the touchpanel to receive power through the same Ethernet cable used for data transmission, simplifying installation and reducing the need for additional power outlets. As a result, installers can enjoy a more straightforward deployment process while maintaining a clean and organized wiring system.

The TLP 350MV supports a variety of control protocols, making it compatible with numerous devices and systems. This versatility enables users to manage not only Extron devices but also third-party equipment, enhancing its usability in diverse environments. Furthermore, the touchpanel includes customizable buttons and icons, allowing users to easily control lighting, audio, video sources, and other functionalities with just a tap.

In terms of build quality, the TLP 350MV features a sleek and durable design, suitable for heavy usage in busy environments. Its compact size allows for convenient mounting on walls or tabletops, providing flexibility in deployment options.

In summary, the Extron TLP 350MV combines advanced features, intuitive design, and seamless integration capabilities, making it a powerful tool for simplifying AV control in various settings. Its user-friendly interface, PoE support, and broad compatibility position it as a comprehensive solution for anyone looking to enhance their AV experience.