Installation

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall, and the sides along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.

Levelling the Appliance

Once the appliance is positioned, adjust the feet (screwing them in or out) of the dishwasher until it is level. In any case, the appliance should not be inclined more than 2°. If the appliance is level, it will help ensure proper performance.

Cold Water Connection

Connect the cold water supply hose to a threaded 3/4 (gas) con- nector and makeing sure that it is fastened tightly in place (see Fig.1).

If the water pipes are new or have not been used for an ex- tended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance.

Hot Water Connection

The water supply to the appliance can also be connected to the house's hot water line (centralised system, heating system), as long as it does not exceed a temperature of 60.

In this case, the wash efficiency slightly reduced.

The connection must be made to the hot water line following the same procedures as those for the connection to the cold water line.

Anti-Flooding Protection

The dishwasher is equipped with a system that stops the supply of water in the event of a problem with the water supply hose, or leaks within the unit, in order to prevent damage to your home. If for any reason the box containing the electrical components happens to get damaged, remove the plug of the appliance from the socket immediately. In order to guarantee that the anti-flood- ing feature operates properly, the box "A" with the water supply hose must be attached to the water supply tap as shown in Fig.

1.No other type of connection is acceptable. The water supply hose must not, under any circumstances, be cut, as it contains electrical parts which are live. If the length of the hose is not adequate to make a proper connection, the hose must be re- placed with one which is long enough. This hose is available upon request from specialised retailers and service centres.

Fig.1

Installation

Drain Hose Connection

Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it run into the sink, making sure to avoid bending or crimping it. Use the special plastic support that comes with the appliance (see Fig.2). The free end of the hose must be at a height between 40 and 100 cm and must not be immersed in water.

Fig.2

Attention:

The special plastic hose support must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain.

Electrical Connection

After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical system is sized for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly (the earthing of the appliance is a safety re- quirement mandated by law).

If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace the plug rather than us- ing adapters or the like as they could cause overheating and burns.

.10.

DW12-LFE SS specifications

The Haier DW12-LFE SS is a remarkable dishwasher that merges innovative technology with user-friendly features, making it a popular choice for modern kitchens. With a sleek stainless steel finish, the DW12-LFE SS not only elevates the aesthetic of your kitchen but also ensures durability and resistance to fingerprints and smudges.

One of the standout features of the DW12-LFE SS is its efficient washing performance. It boasts a powerful washing system that can adapt to various types of dishes, offering multiple wash cycles including intensive, normal, and eco modes. This versatility ensures that whether you're cleaning heavily soiled pots or delicate glassware, the dishwasher can handle it with ease. The adjustable racking system further enhances flexibility, allowing users to customize the interior layout to accommodate larger items without sacrificing cleaning efficiency.

The Haier DW12-LFE SS is equipped with advanced water-saving technology. It utilizes a sensor that detects the size of the load and adjusts the water usage accordingly. This feature not only conserves water but also contributes to lower utility bills, making it an eco-friendly choice. Additionally, its energy-efficient performance is highlighted by its high energy rating, meaning you can enjoy clean dishes without worrying about excessive power consumption.

Noise levels are often a concern with dishwashers, and the DW12-LFE SS excels in this area as well. It operates at a low decibel level, ensuring that it runs quietly in the background without disrupting your home environment. This makes it ideal for open-plan living spaces where a peaceful atmosphere is important.

Another impressive attribute is the dishwasher's advanced drying system. The Haier DW12-LFE SS employs a heat exchange drying system that effectively dries dishes, preventing water spots and ensuring that everything comes out spotless. This advanced drying technology further enhances the overall performance of the dishwasher.

User-friendly controls and an intuitive digital display make operating the DW12-LFE SS a breeze. The delay start option allows you to set the dishwasher to begin its cycle at a time that suits you best, adding to its convenience. This combination of modern features, technological advancements, and user-centric design makes the Haier DW12-LFE SS a valuable addition to any household, providing reliable performance and exceptional cleaning results. Whether you're a busy family or a culinary enthusiast, this dishwasher meets diverse needs while promoting efficiency and ease of use.