Haier DW12-PFE2-E manual Drain hose connection, Electrical Connection

Page 6

4

EN

Drain hose connection

Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it run into the sink, making sure to avoid bending or crimping it. If necessary, fit a syphon trap (U-bend) with a connecting piece for the drain hose (fig.B). The free end of the hose must be at a height between 40 and 100 cm and must not be immersed in water.

fig. B

Attention:

The connecting piece for syphon trap (U-bend) must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain.

Electrical Connection

After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical system is correct for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly (the earthing of the appliance is a safety requirement mandated by law).

If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace the whole cable, rather than using adaptors or the like as they could cause overheating and burns.

Caution:

The dishwasher plug must be accessible even when the appli- ance is installed as a built-in unit so that maintenance can be done safely.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Dishwasher DW12-PFE2-E Instructions for Use Table of Contents EN At time of delivery Safety informationDuring installation During normal useIf a fault occurs When disposing of old appliancesIf your family includes children Levelling the appliance InstallationPositioning the appliance Cold water connectionDrain hose connection Electrical ConnectionGetting to know your dishwasher Close-up view control panelDishwasher interior How to fill the salt SaltLoading the salt into the container Adjusting salt consumption Water HardnessHow to fill rinse aid How to fill the detergent dispenserOur recommendation Not suitable for the dishwasherWhat you should not put into the dishwasher Damage to glassware and other dishesHow to use the lower rack Arranging crockery, glasses, etc. in the dishwasherHow to use the upper rack ShelfProgramme overview Rinse off if the dishes have beenEN50242 test with rinse aid setting Programme selection Switching the dishwasher onWashing dishes Earn savingsEnd of programme Switching the dishwasher OFFDelayed start programming Interrupping the programmeCancelling or modifying a cycle Speedup WashHow to keep your dishwasher in shape Dishwasher salt Care and maintenanceOverall condition of appliance Rinse-aidSpray arms Fault finding Resolving minor problems yourselfAppliance does not start up Lid in detergent compartment cannot be closed Indicator lamps do not extinguish after washing has finishedLower spray arm rotates with difficulty Remnants of detergent stuck inside dispenserAppliance stops suddenly while washing is taking place Water remains inside appliance after programme has endedUnusual amount of foam is creased Knocking sound can be heared while washing is taking placeGlasses have a dull appearance Plastic items are discolouredDishes, cultlery, etc. have not been dried Traces of rust on cutleryTechnical data Important informationGeneral information Water level switch Washing pump motor

DW12-PFE2-E specifications

The Haier DW12-PFE2-E is a modern dishwasher that exemplifies efficiency and convenience in kitchen appliance technology. Designed with the contemporary kitchen in mind, it offers a blend of practicality and advanced features tailored for everyday use. This model stands out thanks to its sound engineering, aesthetic appeal, and innovative characteristics that cater to the needs of busy households.

One of the main features of the Haier DW12-PFE2-E is its spacious interior, which can accommodate up to 12 place settings. This makes it ideal for families or individuals who frequently host gatherings. The adjustable upper rack allows users to customize the space according to their dish sizes, ensuring optimal loading flexibility. Additionally, the dedicated cutlery tray organizes utensils effectively, freeing up more space in the lower basket.

In terms of technology, the Haier DW12-PFE2-E boasts several smart wash programs, including intensive, eco, and rapid cycles. The intensive mode is perfect for tackling tough, baked-on dirt, while the eco mode allows for water and energy savings without compromising cleaning performance. The rapid cycle is perfect for when time is of the essence, providing quick results for lightly soiled dishes.

Another standout feature is the energy efficiency of this dishwasher. It operates at a low noise level, typically around 44 dB, making it a quiet addition to any kitchen. The machine also enjoys an A++ energy rating, which indicates lower energy consumption and reduced impact on utility bills, thus appealing to environmentally conscious consumers.

User convenience is further enhanced by the inclusion of a delay start function, allowing users to schedule cycles at their convenience. This feature is particularly useful for running the dishwasher during off-peak hours to save on energy costs.

The Haier DW12-PFE2-E also includes an intuitive digital display that enables easy monitoring and control of the washing process. With diverse options and settings at your fingertips, users can tailor each wash according to their specific needs.

Durability is an inherent characteristic of the design, with high-quality materials ensuring longevity and reliability. Overall, the Haier DW12-PFE2-E is a well-rounded dishwasher that combines efficiency, innovative features, and user-friendly technologies, making it a great choice for any modern kitchen.
Top Page Image Contents