Care and Maintenance of C500AP

C500AP Airpot Coffee Brewer

Preventive maintenance is essential in keeping your Curtis coffee brewer performing at it's peak. Regular cleaning will pay off with an appealing, high performance coffee brewing machine.

Preventive Maintenance

1.Remove the sprayhead from brewer and clean it once a week; more often in heavy lime areas.

2.The inside of the heating tank may, occasionally, require removing of lime build-up. The frequency is determined by local water conditions.

WARNING - When cleaning the unit, do not use cleansers, bleach liquids, powders or any other substance containing chlorine. These products will promote corrosion and will pit the stainless steel.

USE OF THESE PRODUCTS WILL VOID YOUR WARRANTY.

Daily Cleaning

Using a daily routine of cleaning the external parts of the C500AP should maintain it's new appearance and insure that the flavor of the coffee is always good.

1.Wipe off any spills, dust or debris from exterior surfaces.

2.Rinse out the brew cone.

3.Clean sprayhead and dome using a non-toxic cleaner and a damp cloth.

4.Clean the brew cone slide rails with a brush or damp cloth. Dry thoroughly.

Stainless Steel Polish can be used to clean the outside surfaces of the C500AP coffee brewer. This is to prevent scratching of the stainless steel surfaces.

TROUBLE SHOOTING:

PROBLEM: WATER DOES NOT FLOW INTO HEATING TANK.

POSSIBLE CAUSE	SOLUTION
1. Water line turned off	Make sure the brewer is receiving enough water pressure. Open the
or water filter needs	water line and verify water flow.
changing

2. Water inlet valve coil	Turn the power off. Disconnect wires from water inlet coil terminals and
burned out	connect a power cord to the terminals. Plug cord into a 120V outlet and
	verify if water flows when plugged in and stops when power is discon-
	nected. If valve fails this test, replace valve or coil.

3. Grounded probe	When the water level gets below the probe tip, water should automati-
	cally refill the tank. If not, pull wire off the probe terminal. Water should
	now start flowing into the tank. If not, check the water level control board
	(see step 4) or inlet valve (step 5).

[ 3 ]

C500APT, C500AP specifications

Wilbur Curtis Company has long been a prominent name in the coffee equipment industry, known for its high-quality brewing solutions. One of its standout products is the C500AP/C500APT series, which has gained acclaim among coffee enthusiasts and commercial operators alike. These machines are designed to meet the demands of both high-volume coffee production and consistent performance, making them a staple in cafés, restaurants, and various foodservice venues.

The C500AP model features a robust brewing system capable of producing up to 12 gallons of coffee per hour, while the C500APT mirrors this performance with additional advanced features. Both models are equipped with an innovative brewing technology that ensures optimal extraction and rich flavor profiles. The brewing process is finely tuned to allow for precise control over water temperature and contact time, which are critical in achieving the best coffee flavor.

At the heart of the C500AP/C500APT series is the Curtis Heat Exchange System, which allows for rapid brewing while maintaining the desired coffee temperature. This ensures that every batch of coffee is brewed to perfection, regardless of the volume being produced. Additionally, the machines boast a pre-infusion feature, allowing for the saturation of coffee grounds before the main brewing cycle, enhancing flavor extraction and aroma.

Ergonomics is another key feature of these models. The C500AP and C500APT are designed with user-friendly interfaces, making them easy to operate even in busy environments. Both machines also come with programmable brew controls, allowing users to customize brew strength and volume, which is essential for meeting diverse customer preferences.

Durability and reliability are hallmarks of the Wilbur Curtis brand, and the C500 series is no exception. Constructed from heavy-duty materials, these machines are built to withstand the rigors of daily use. Their maintenance-friendly design ensures that routine cleaning and servicing can be performed with minimal downtime, thus maximizing operational efficiency.

In conclusion, the Wilbur Curtis C500AP and C500APT coffee brewers stand out for their combination of innovative brewing technology, robust performance, and user-centric design. With their ability to produce high-quality coffee quickly and efficiently, they are ideal for any establishment focused on delivering exceptional coffee experiences. As the demand for quality coffee continues to grow, the C500 series remains an excellent choice for commercial operators looking to enhance their coffee offerings.