Installation and Operation, cont’d
4. Attach the shelf to the rack with the four provided
Under-desk mounting
The DVI DA2 and DVI DA4 can be mounted under furniture using the optional Extron MBU 125
Under furniture mounting
To mount the unit under a desk or table:
1. If necessary, remove rubber feet from the bottom of the unit.
2. Secure the
3. Hold the unit, with the mounting brackets attached, under the furniture where it will be secured. Mark the position of the holes on the underside of the furniture.
4. In the marked positions, drill four pilot holes 3/32" (2 mm) in diameter and 1/4" (6 mm) deep.
5. Insert the four provided wood screws into the pilot holes and tighten until approximately 1/4" (6 mm) of the screw head is protruding.
6. Guide the holes of the mounting brackets over the protruding screw head and slide the unit forward or backward to seat it firmly under the furniture.
7. Tighten all four wood screws to secure the unit in place.