Extron electronic DVI DA4, DVI DA2 user manual Rear Panel Features

DVI DA2 and DVI DA4 • Installation and Operation

LOCAL OUTPUT

3

Rear panel features

A Power input — Connect the provided power supply to the 3.5 mm, 2-pole captive screw power receptacle.

B Input connector — Connect the input signal to the female DVI connector. The DVI input signal is equalized to ensure integrity.

N Although DVI-I dual link connectors are used, the DVI DA2 and DVI DA4 are only compatible with single-linkDVI-D video signals.

C Output Connectors — Connect up to four DVI-D outputs to display devices, using the female DVI connectors.

D Local Monitor connector — Output 1 (Local Monitor) is used as a DDC reference. For the input device to provide a signal at the correct resolution and refresh rate, there must be a display device connected to output 1.

N To ensure proper operation, display devices connected to outputs 2-4 must be able to handle resolutions equal or greater than that of the local monitor on output 1.

1

DVI-D OUTPUT

4

Rear Panel Features

SUPPORTS DVI-D ONLY

DVI DA2

POWER
12V	INPUT	LOCAL OUTPUT	OUTPUT
0.4A MAX

1 2

POWER	DVI-D INPUT
12V
0.4A MAX

3

DVI DA4

2 3 4

2-7