Behringer NU6000DSP, NU3000DSP, NU1000DSP user manual Behringer Amp Remote Software, Delay, Limit

Page 9

9iNUKE NU6000DSP/NU3000DSP/NU1000DSP User Manual

10.Adjust attack (Atime) and release (Rtime) to your preferred values.

11.Press the SELECT encoder when finished to return to the top-level DEQ screen.

DELAY

The DELAY DSP module digitally slows the final signal output from the amplifier by a programmable amount (expressed as either distance or time). This signal delay helps prevent phase and synchronization problems caused by sound traveling through air over long distances, e.g., between speaker arrays separated by long distances or between a performance stage and distant sound reinforcement speakers.

Programming signal delay

1.Choose between signal paths (A#1, B#1) by rotating the SELECT encoder knob.

2.Press the SELECT encoder knob to enter the parameter screens.

3.Move up or down between parameters by pressing the UP / DOWN arrow buttons.

4.Choose between 0° and 180° phase (PHASE) by rotating the SELECT encoder knob.

5.Choose your amount of signal delay (Delay) by rotating the SELECT encoder button.

6.Fine tune the Delay value using the (fine) parameter.

7.Change the delay’s unit of measure (Unit), if necessary, by rotating the SELECT encoder knob. The delay value can be expressed in milliseconds (ms), meters (m), or feet (ft).

8.Press the SELECT encoder when finished to return to the top-level DELAY screen.

3.3 BEHRINGER Amp Remote Software

The BEHRINGER Amp Remote software allows the user to control all iNUKE DSP settings remotely from a computer via the USB connection located on the iNUKE front panel.

3.3.1 METERS

Meters

Monitor input and output levels by using the virtual meters on the right hand side of the control software screen. Adjust input levels using the knobs on the amplifier’s front panel.

The Amp Remote software displays two level meters, one for the input signal, and another meter for the final output signal.

LIMIT

Input Meters

The LIMIT DSP module controls the unit’s output limiter, with programmable parameters for threshold (Thresh), release (Rtime), and hold (Hold).

The top-level LIMIT screen always displays the threshold (Thresh) setting for quick reference.

Programming the output limiter

1.Choose between signal paths (A#1, B#1) by rotating the SELECT encoder knob.

2.Press the SELECT encoder knob to enter the parameter screens.

3.Move up or down between parameters by pressing the UP / DOWN arrow buttons.

4.Choose a threshold (Thres) setting by rotating the SELECT encoder knob.

5.Choose a release time (Rtime) by rotating the SELECT encoder knob.

6.Choose a hold (Hold) setting by rotating the SELECT encoder knob.

7.Press the SELECT encoder when finished to return to the top-level LIMIT screen.

The input meters show the signal level at the CH A and CH B inputs. If the input signal exceeds the 0 dB level, the red Clip indicator will light over the channel experiencing an overload.

The input level can only be controlled by using the CH A and CH B knobs on the front panel of the iNUKE amplifier. The Amp Remote software does not control the input level.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents INUKE NU6000DSP/NU3000DSP/NU1000DSP Table of Contents Limited Warranty Clean only with dry clothManufacturer Injury from tip-overControl Elements IntroductionBefore you get started Front panelRear panel DSP ProcessorProcessor Functionality Front Panel controlSetup 2/4 Panel Lock Editing a Preset titleSetup 3/4 Device Name Naming the amplifier Locking the amplifierStereo DualBIAMP1 BIAMP2Programming filters/bi-amping crossover XoverDEQ Programming dynamic EQsDelay Behringer Amp Remote SoftwareLimit Changing amplifier mode ConfigurationMode descriptions Dual Mono Output MetersDelay/Peak Limiter Channel Link DelayBi-Amp Peak LimiterFilter/Crossover Setting a linked crossover frequencyFilter/Crossover Frequency Curve Display Moving filter thresholds via click-and-dragAdjusting Parametric EQ gain via click-and-drag Adjusting Parametric EQ frequency via click-and-dragAdjusting dynamic EQ frequency via click-and-drag Parametric EQ Control ViewSetup Adjusting dynamic EQ gain via click-and-dragPC Presets Amp PresetsBi-amping ApplicationsProgramming Behringer Amp Remote Software for bi-amping Installation Rack mountingConnections NU6000DSP SpecificationsNU3000DSP NU1000DSP Weight Appr .4 lbs / 2.9 kg150 W 70 WAddress INUKE NU6000DSP/NU3000DSP/ NU1000DSPUSA Important informationWe Hear You

NU3000DSP, NU1000DSP, NU6000DSP specifications

The Behringer NU series, including the NU6000DSP, NU1000DSP, and NU3000DSP, represents a significant advancement in lightweight, high-performance power amplification. These amplifiers are particularly well-suited for live sound applications, installations, and professional audio environments, providing reliable power alongside cutting-edge features.

Starting with the NU6000DSP, it delivers a remarkable 6,000 watts of output power, making it an ideal choice for large venues and outdoor events. One of its standout features is the built-in Digital Signal Processor (DSP), which allows users to customize sound with precision. The DSP offers functionalities like equalization, crossover, and limiting, enabling users to tailor audio output for different settings and requirements. Additionally, the NU6000DSP has an efficient fan cooling system, ensuring optimal performance without overheating during long gigs.

Next in the lineup is the NU3000DSP, which provides up to 3,000 watts of power. This model retains many of the same advanced features as its higher-powered sibling, including the DSP capabilities. The NU3000DSP is favored by mobile DJs and small to medium-sized event spaces for its balance of power and portability. Its lightweight design, coupled with a durable construction, makes it easy to transport without sacrificing performance. Additionally, it includes a variety of input options, making it compatible with numerous audio sources.

Finally, the NU1000DSP, the most compact of the trio, delivers 1,000 watts of power. It is perfect for smaller venues or as part of a larger rig. Despite its size, it features the same high-quality DSP technology, allowing users to maintain character and control over their sound. The NU1000DSP is designed with user-friendly controls and a clear LED indication for monitoring levels.

All three amplifiers utilize Class D technology, which contributes not only to their lightweight design but also to their energy efficiency. This technology minimizes heat generation while maximizing power output, ensuring that users receive optimal performance without the bulk of traditional amplifiers. Behringer’s NU series also includes comprehensive protection measures like short-circuit and thermal protection, safeguarding both the amplifiers and connected speakers.

In summary, the Behringer NU6000DSP, NU3000DSP, and NU1000DSP represent powerful, versatile solutions for various audio applications. Their combination of integrated DSP, Class D technology, and reliable performance makes them a popular choice for professionals seeking high-quality amplification in a variety of environments.
Top Page Image Contents