Ice-O-Matic ICEU060 Sanitizing And Cleaning, General, Icemaker In Place Cleaning

Page 14

Sanitizing And Cleaning

ICEU060

An Ice-O-Matic ice machine represents a sizable investment of time and money in any company’s business. In order to receive the best return for that investment, it MUST receive periodic maintenance. It is the USER’S RESPONSIBILITY to see that the unit is properly maintained. The following is a list of recommended maintenance that will help keep the machine running with a minimum of problems. Maintenance and cleaning should be scheduled at least every six (6) months.

General

The periods and procedures for maintence are provided as a guide. Cleaning will vary depending upon local water conditions and amount of ice used. Each ice maker must be maintained individually, in accordance with its own requirements.

Icemaker In Place Cleaning

1.Remove the ice from the bin.

2.Remove the front panel.

3.Rotate the control knob counterclockwise to the OFF position.

4.Remove the curtain by pulling forward on the left end, and then pulling the curtain to the left and out of the machine.

5.Lift up spray platform, locate the stand pipe to the right of the opening, and pull it out to drain the reservoir. Replace the stand pipe, spray platform, and curtain.

6.Mix approximately 3 ounces of approved ice machine cleaner with 1.5 quarts of warm (95ºF-115ºF) potable water, and pour this solution into the reservoir at the curtain base.

Ice machine cleaner contains acids. These compounds may cause burns. If swallowed DO NOT induce vomiting. Give large amounts of water or milk. Call Physician immediately. In case of external contact, flush with water.

7.Rotate the control knob the “normal” position. Operate the machine for 20 minutes.

8.Then switch the toggle switch to the “cleaning position for about three minutes to release all the cubes from their cups.

9.Switch the cleaning toggle switch to the “operation” position, and allow the machine to run for 30 minutes, or until the next batch of ice is released.

10.Pour hot water into the bin to melt the ice produced during cleaning, and to clean out the drain. Wipe the interior of the bin with mild soap and hot water, rinse with cold water.

To sanitize, prepare ½ ounce of approved (EPA/FDA) sodium hypochloride food equipment sanitizer to 1 gallon of warm water to form a solution with 100 minimum to 200 maximum ppm free chlorine yield, and repeat steps 3-10, except substitute the sanitizer solution for the ice machine cleaner solution.

11.Replace the front panel

Ice Maker Maintenance

1.Shut off water supply to the icemaker.

2.Disconnect the water inlet tube from the connection at the back of the icemaker, and check the screen at that point. If very dirty, carefully pull the screen out and clean it. Reassemble the water line to the icemaker.

3.Open the water shutoff valve.

4.Unplug the power cord to disconnect electrical power to the icemaker.

5.Remove the front panel.

6.Clean the air-cooled condenser fins using a brush or vacuum cleaner, or if needed, coil cleaner. A dirty condenser coil reduces the ice making capacity of this machine.

Page 13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page Table of Contents IntroductionSpecifications SpecificationsInstallation LocationWater Supply and Drain Connection ElectricalFinal Check Initial Start Up How It Works Component DescriptionComponent Location Water System Freezing CycleRefrigeration System How It Works Adjustment Of The Bin Thermostat Control Operation and AdjustmentAdjustment Of The Cube Size Defrost Cycle Time 2-3 MinutesIce Maker Maintenance Sanitizing And CleaningIcemaker In Place Cleaning GeneralService Diagnosis ICEU060Cube Size Control Component ReplacementBin Thermostat Refrigeration SystemWater Pump Spray PlatformInlet Water Valve Component Layout Wiring Diagram

ICEU060 specifications

The Ice-O-Matic ICEU060 is a high-efficiency ice maker that has become a popular choice among commercial establishments seeking reliable and high-quality ice production. This model is specifically designed to cater to the needs of restaurants, bars, cafes, and other foodservice operations, providing a consistent supply of ice that is essential for service.

One of the primary features of the ICEU060 is its production capacity. This unit is capable of producing up to 600 pounds of ice per day, ensuring that even during peak hours, businesses can meet their ice requirements. The ICEU060 is designed for efficiency, with a large storage capacity that holds up to 250 pounds of ice at a time. This minimizes the need for frequent ice refills, allowing staff to focus on other important tasks.

The ICEU060 employs advanced technologies for optimal performance. It features an air-cooled condenser, which enhances energy efficiency by using ambient air to cool the unit. This design not only saves energy but also helps prolong the lifespan of the machine. Additionally, the unit incorporates a Harvest Assist feature that ensures quick and efficient ice harvesting, reducing the time it takes for new ice to be produced.

Another notable characteristic of the ICEU060 is its durability. Built with a stainless steel exterior, this ice maker is not only resistant to corrosion but also easy to clean and maintain. The robust design ensures that it can withstand the rigors of a busy kitchen environment, while maintaining its aesthetic appeal.

The Ice-O-Matic ICEU060 is also designed for ease of use. It comes with an intuitive control panel that allows operators to monitor production cycles and make adjustments as needed. Furthermore, the unit is equipped with a self-cleaning feature, streamlining maintenance and ensuring that the ice produced is of the highest sanitary quality.

In summary, the Ice-O-Matic ICEU060 ice maker stands out due to its impressive production capacity, energy-efficient technologies, and durable construction. By incorporating features that prioritize performance and ease of use, the ICEU060 proves to be an essential asset for any business that relies on a consistent supply of high-quality ice. This makes it a valuable investment for establishments focused on providing exceptional service to their customers.
Top Page Image Contents