Ice-O-Matic ICEU060 installation manual Spray Platform, Inlet Water Valve, Water Pump

Page 17

Component Replacement

ICEU060

Spray Platform

1.Unplug the icemaker to disconnect electrical power.

2.Open ice bin door.

3.Pull out on the left side and remove curtain assembly.

4.Lift the spray platform up and pull out to get to the water hose at the base of the platform.

5.Pull hose off of connection to spray platform, and pull platform from the icemaker.

6.To replace, reverse the removal procedures.

Inlet Water Valve

1.Unplug the icemaker to disconnect electrical power.

2.Shut off water supply to icemaker.

3.Remove the lower back panel, pull out to expose inlet water valve.

4.Disconnect electrical wires from the inlet water valve.

5.Disconnect water lines to and from the water valve

6.Remove the valve from the icemaker.

7.Reverse removal procedure to replace.

Water Pump

1.Disconnect the electrical wires from the cube size control.

2.Remove the top panel,

3.Open ice bin door, pull up from the top and remove.

4.Remove curtain by pulling forward and out on the left end.

5.Remove 2 screws holding pump bracket to right side panel.

6.Disconnect 2 electrical leads and 1 ground wire from the pump.

7.Pull out spray platform, lift pump and disconnect hose.

8.Pull water pump up and out of icemaker.

9.Dismount water pump from cover assembly (retaining brackets), and remount the replacement pump in its place.

10.Reverse removal procedures to replace.

Page 16

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Page Introduction Table of ContentsSpecifications SpecificationsLocation InstallationElectrical Water Supply and Drain ConnectionFinal Check Initial Start Up Component Description How It WorksComponent Location Freezing Cycle Water SystemRefrigeration System How It Works Adjustment Of The Cube Size Operation and AdjustmentAdjustment Of The Bin Thermostat Control Defrost Cycle Time 2-3 MinutesIcemaker In Place Cleaning Sanitizing And CleaningIce Maker Maintenance GeneralICEU060 Service DiagnosisBin Thermostat Component ReplacementCube Size Control Refrigeration SystemWater Pump Spray PlatformInlet Water Valve Component Layout Wiring Diagram

ICEU060 specifications

The Ice-O-Matic ICEU060 is a high-efficiency ice maker that has become a popular choice among commercial establishments seeking reliable and high-quality ice production. This model is specifically designed to cater to the needs of restaurants, bars, cafes, and other foodservice operations, providing a consistent supply of ice that is essential for service.

One of the primary features of the ICEU060 is its production capacity. This unit is capable of producing up to 600 pounds of ice per day, ensuring that even during peak hours, businesses can meet their ice requirements. The ICEU060 is designed for efficiency, with a large storage capacity that holds up to 250 pounds of ice at a time. This minimizes the need for frequent ice refills, allowing staff to focus on other important tasks.

The ICEU060 employs advanced technologies for optimal performance. It features an air-cooled condenser, which enhances energy efficiency by using ambient air to cool the unit. This design not only saves energy but also helps prolong the lifespan of the machine. Additionally, the unit incorporates a Harvest Assist feature that ensures quick and efficient ice harvesting, reducing the time it takes for new ice to be produced.

Another notable characteristic of the ICEU060 is its durability. Built with a stainless steel exterior, this ice maker is not only resistant to corrosion but also easy to clean and maintain. The robust design ensures that it can withstand the rigors of a busy kitchen environment, while maintaining its aesthetic appeal.

The Ice-O-Matic ICEU060 is also designed for ease of use. It comes with an intuitive control panel that allows operators to monitor production cycles and make adjustments as needed. Furthermore, the unit is equipped with a self-cleaning feature, streamlining maintenance and ensuring that the ice produced is of the highest sanitary quality.

In summary, the Ice-O-Matic ICEU060 ice maker stands out due to its impressive production capacity, energy-efficient technologies, and durable construction. By incorporating features that prioritize performance and ease of use, the ICEU060 proves to be an essential asset for any business that relies on a consistent supply of high-quality ice. This makes it a valuable investment for establishments focused on providing exceptional service to their customers.
Top Page Image Contents