Extron electronic MAC manual DA1, Features

Page 2

P/2 DA1

 

P/2 DA2 PLUS

 

 

 

 

 

 

P/2 DA1

Extron’s P/2 DA1, “The Peaker,” is an extremely small, one input, one buffered output VGA/SVGA/XGA/SXGA line driver. This DA drives a high resolution computer-video signal up to 250 feet through high-quality cable, such as Extron’s VGA cable. The

P/2 DA1 provides amplification and peaking. This allows the video signal to be run long distances and produces a brighter and sharper image than normally possible. This is especially useful in the case of laptops, which often output a low power video signal. The

P/2 DA1 also restores low level sync voltages found on many lap- tops (as low as two volts) to normal TTL levels. This allows a lap- top to function with display devices and cable types it normally wouldn’t work with. The laptop’s ID bits are passed through to the display. The P/2 DA1 is housed in an adapter-sized enclosure, which allows it to be easily connected directly to a laptop.

FEATURES

Bandwidth – 300 MHz (-3dB) RGB video bandwidth.

Compatibility – Compatible with VGA, SVGA, XGA, and SXGA graphic cards, monitors, and projectors as well as Macs with 15-pin HD output.

Input connector – Features a 15-pin HD male connector for video input.

Output connectors – Features a 15-pin HD female connector for buffered video output.

ID bits – Laptop’s ID bits are passed through to the display.

Gain and peaking – User-selectable gain and peaking help maintain signal integrity during long cable runs.

Power supply – A 110VAC, wall-mount power supply is attached to the USA/domestic version of the P/2 DA1, and a 110-220VAC, desktop power supply is attached to the world version of the P/2 DA1.

Part numbers

60-319-01 (USA/domestic)

60-319-02 (World)

APPLICATION DIAGRAM

Power

Extron

VGA Cable

P/2 DA1

LCD Projector

Laptop Computer

P/2 DA2 PLUS

Extron’s P/2 DA2 PLUS is a one input, two buffered output, high resolution VGA/SXGA distribution amplifier. This DA drives a high resolution computer-video signal up to 250 feet through high- quality cable, such as Extron’s VGA cable.

FEATURES

Bandwidth – 270 MHz (-3dB) RGB video bandwidth.

Compatibility – Compatible with all modes/resolutions of VGA, SVGA, XGA, and SXGA graphic cards, monitors, and projectors.

Input connector – Attached 4' 15-pin HD male cable is included for reliable connection of video signals.

Output connectors – Features 15-pin HD female connectors for buffered video output and buffered local monitor output.

ID bits – ID bits are routed to local monitor output.

Power supply – A 110VAC, wall-mount power supply is attached to the USA/domestic version of the P/2 DA2 PLUS, and a 110-220VAC, desktop power supply is attached to the world version of the P/2 DA2 PLUS.

Part numbers

60-046-01 (USA/domestic)

60-046-02 (World)

APPLICATION DIAGRAM

P/2 DA2 PLUS

Up to 250' w/ Extron

VGA Extension Cable

PC Computer

Projector

Image 2
Contents VGA, MAC, & 13W3 Distribution Amplifiers DA1 FeaturesDA1 DA2 MT DA2 LC DA2 MTDA2 LC Part Numbers DA2 WMDA4 Plus P/2 DA6 Plus DA2 WM AAP w/ Architectural Adapter PlatesSW2 VGA DA2 a Shown SW2 VGA DA2 aSW2 VGA DA2 AF Mac DA2 Plus13W3 DA2 13W3 DA2