Extron electronic MAC manual DA2 WM, DA4 Plus P/2 DA6 Plus, Part Numbers, DA6 Plus Shown

Page 4

P/2 DA2 WM

P/2 DA4 PLUS P/2 DA6 PLUS

P/2 DA2 WM AAP (w/ Architectural Adapter Plates)

Extron’s P/2 DA2 WM is a wall-mountable, one input, two buffered output, high resolution VGA/SXGA distribution amplifier with audio. This DA drives a high resolution com- puter-video signal up to 250 feet through high-quality cable, such as Extron’s VGA cable. The P/2 DA2 WM is enclosed in a two-gang box with a face plate (available in grey, black, or white). It fits flush into a wall, podium, or table and blends into the environment. The P/2 DA2 WM is available in an EC model compatible with European channel mounting sys- tems. Both the P/2 DA2 WM and the P/2 DA2 EC are avail- able with openings for optional Architectural Adapter Plates to provide additional signal pass-through connectors.

FEATURES

The P/2 DA2 WM has the same features as the P/2 DA2 MT except for the following differences:

Bandwidth – 270 MHz (-3dB) RGB video bandwidth.

Input connector – Features a 15-pin HD male connector for input. The P/2 DA2 WM does not include an input cable.

Wall-mountableSelf-contained enclosure allows easy installation into existing walls.

EC model – EC version with white face plate available for European cable channel mounting systems.

Architectural Adapter Plate openings – The P/2 DA2 WM and P/2 DA2 EC are available with openings for Architectural Adapter Plates (AAPs). Over 100 AAPs fea- ture various video and audio signal pass-through connec- tors.

Power – Accepts 12-24 AC/DC through captive screw connector. Power supply sold separately.

PART NUMBERS

P/2 DA2 WM (grey)

60-296-01

P/2 DA2 WM (black)

60-296-02

P/2 DA2 WM (white)

60-296-03

P/2 DA2 EC (white)

60-296-10

P/2 DA2 WM AAP (grey)

60-311-01

P/2 DA2 WM AAP (black)

60-311-02

P/2 DA2 WM AAP (white)

60-311-03

P/2 DA2 EC AAP (white)

60-311-10

P/2 DA6 PLUS Shown

Extron’s P/2 DA4 PLUS and P/2 DA6 PLUS are rack-mount- able, high resolution VGA/SXGA distribution amplifiers. The P/2 DA4 PLUS provides four buffered outputs, and the

P/2 DA6 PLUS provides six buffered outputs. Each DA drives a high resolution computer-video signal up to 250 feet through high-quality cable, such as Extron’s VGA cable.

FEATURES

Bandwidth – 300 MHz (-3dB) RGB video bandwidth.

Compatibility – Compatible with all modes/resolutions of VGA, SVGA, XGA, and SXGA graphic cards, monitors, and projectors. Compatible with Mac sources and Mac- compatible displays with optional Mac/VGA adapter.

Video connectors – Features 15-pin HD female connec- tors for video input, buffered video outputs, and buffered local monitor output.

ID bits – ID bits are routed to local monitor output.

Boost – Boost switch helps maintain signal integrity for long cable runs.

Rack-mountableHoused in a 1U high, 1/2 rack width enclosure.

Power supply – Includes a worldwide, 100-240VAC, 50/60 Hz, auto-switchable internal power supply.

Part numbers

P/2 DA4 PLUS ........................................ 60-246-01 P/2 DA6 PLUS ........................................ 60-245-01

APPLICATION DIAGRAM

P/2 DA6 PLUS

 

PC Computer

VGA/SVGA Compatible

 

Displays

Image 4
Contents VGA, MAC, & 13W3 Distribution Amplifiers DA1 FeaturesDA1 DA2 LC DA2 LC DA2 MTDA2 MT DA2 WM DA4 Plus P/2 DA6 PlusPart Numbers DA2 WM AAP w/ Architectural Adapter PlatesSW2 VGA DA2 a SW2 VGA DA2 AFSW2 VGA DA2 a Shown Mac DA2 Plus13W3 DA2 13W3 DA2