Grindmaster TEA-300 instruction manual Filling Problems

Page 11

 

FILLING PROBLEMS

 

 

 

 

 

Problem/Cause

Remedy

Overfilling of water tank when power is off

 

• Disassemble, clean and reassemble valve. If needed service

 

 

Fill valve not sealing properly

 

 

 

 

kits are available

Overfilling of water tank when power is on

 

 

 

Fill valve not sealing properly

 

• Disassemble, clean and reassemble valve. If needed service

 

Fill valve not de-energizing

 

kits are available

 

 

• Check wiring of timer, switches and fill valve, if o.k.

 

 

 

then defective timer board

 

 

 

 

 

HEATING PROBLEMS

 

 

 

 

Problem/Cause

Remedy

Water is hot but hot light not illuminated

 

• Replace light

 

 

Light burned out

 

Water tank will not heat

 

• Recalibrate thermostat. If no remedy or thermostat does

 

Thermostat faulty or out of calibration

 

 

 

 

not cycle, replace thermostat

 

• Bad electrical connection of heating circuit

 

• Check each electrical connection of heating circuit

Recovery time is very long

 

• Check each electrical connection of heating circuit

 

• Bad electrical connection of heating circuit

 

 

• Bad high limit switch

 

• Check resistance across high limit switch, should be no

 

 

 

resistance. If resistance present then replace

 

• Faulty heating element

 

• Check resistance across element with power conductors

 

 

 

disconnected. If resistance is much less than 8 Ohms or

 

 

 

much more than 15 Ohms, replace part

 

 

 

 

If you still need help, call our service department at (800) 568-5715 (Monday through Friday, 8 am - 6 pm EST) or an authorized service center in your area. Please have the model numbers ready so that accurate information may be given.

Prior authorization must be obtained from Grindmaster Corporation’s Technical Service Department for all warranty claims.

American Metal Ware® Tea Brewers

Page 10

Image 11
Contents American Metal Ware Tea Brewers Page American Metal Ware Tea Brewers Electrical Requirements Set-Up / PositionWater Hook-Up Use Control Functions Initial Start-UpOperation AdjustmentsTimer Adjustment Cleaning After Each Brew Cleaning ProceduresThermostat Adjustment Bypass AdjustmentTo Drain Water Tank ServiceDaily Cleaning Weekly CleaningFigure E To Remove the Water Tank Heating ElementTroubleshooting Guide Filling Problems Tea-300 Isometric Tea-300 3-Gallon Dispenser Isometric Tea-300 Wiring Schematic

TEA-300 specifications

The Grindmaster TEA-300 is an innovative tea brewing machine designed for both commercial and home use, ensuring that tea enthusiasts can enjoy perfectly brewed tea every time. With a focus on quality, efficiency, and user-friendly features, the TEA-300 stands out in the crowded market of tea brewers.

One of the standout features of the Grindmaster TEA-300 is its precise temperature control system. This technology allows users to select the ideal brewing temperature for a wide range of tea leaves, from delicate green teas to robust black teas. The machine’s digital thermostat ensures that the water is heated to the exact temperature required, enhancing the flavor extraction and overall quality of the brew.

In addition to temperature control, the TEA-300 offers programmable brewing cycles. Users can easily customize their brewing time, which is crucial for achieving the perfect balance of flavors in each cup. This feature is especially beneficial for establishments that serve a variety of teas, as it allows baristas to adapt the brewing process according to the specific type of tea being prepared.

The Grindmaster TEA-300 also incorporates a built-in water filtration system, which ensures that the water used for brewing is pure and free from impurities. This not only improves the taste of the tea but also extends the life of the machine by reducing the buildup of mineral deposits. The filtration system is easy to maintain, ensuring that users can consistently enjoy high-quality tea without the hassle of frequent upkeep.

Another noteworthy characteristic of the TEA-300 is its energy efficiency. Designed with sustainability in mind, the machine utilizes energy-saving technology that reduces power consumption while maintaining optimal performance. This makes it a responsible choice for environmentally conscious consumers and businesses looking to minimize their ecological footprint.

The design of the Grindmaster TEA-300 is both sleek and functional. Its compact footprint allows it to fit easily into any kitchen or commercial space, while its intuitive interface makes it easy for users to navigate through the settings. The robust construction ensures durability, making it suitable for high-demand environments such as cafes, restaurants, and tea shops.

In summary, the Grindmaster TEA-300 is a top-of-the-line tea brewing machine that combines advanced technology, user-friendly features, and efficient design. With its precise temperature control, programmable brewing cycles, built-in water filtration, energy efficiency, and durable construction, it is an excellent choice for anyone looking to elevate their tea brewing experience. Whether for personal use or a bustling commercial setting, the TEA-300 promises to deliver consistently exceptional tea with every brew.