Grindmaster TEA-300 instruction manual Initial Start-Up, Use Control Functions

Page 5

Electrical Requirements (cont.)

!WARNING: ELECTRIC SHOCK HAZARD

NEVER USE THE GROUND CONDUCTOR AS A NEUTRAL. THIS COULD CAUSE ELECTROCUTION.

3. The body of the brewer must be grounded. A ground lug is provided for this purpose.

Initial Start-Up

1.Turn on the water supply to the brewer. Check for leaks at supply line to fill valve connection.

2.Make sure the power switch is turned to the “Off” position. The power switch is located on the upper back panel of the brewer.

3.Plug in the unit’s power cord into a properly grounded receptacle.

4.Place the brew basket into the brew rails of the brewer.

5.With the dispenser’s cover removed, place the tea dispenser onto the tea brewer’s base.

6.The water tank needs to be primed. Press the Start switch to begin filling the water tank. After approximately 5 minutes the brew will terminate and the water fill valve will turn off. Drain off the dispensed water from the dispenser and press the Start switch again to continue. You will have to perform this step until the water begins to exit through the sprayhead. When this occurs, press the Stop switch. At this point the water tank is primed.

7.Turn off the power switch to energize the heating element.

8.When the water temperature has reached the preset temperature the Water Hot lamp will illuminate. This may take between 15 and 35 minutes.

9.Check the brewer water temperature at the sprayhead. If the temperature needs to be adjusted, refer to Adjustments section of this manual for instructions.

Use Control Functions

Power Switch: Controls the power to the heating element for the water tank.

Start Switch: Press to start a brew cycle.

Stop Switch: Pressing this switch during a brew cycle stops the cycle prematurely. Note: After the switch is pressed, adequate time must be given to drain the brew basket before removing from the unit.

!CAUTION: HOT LIQUID HAZARD

TEA BASKET CONTAINS VERY HOT LIQUID UNTIL THE DRIP-THROUGH IS COMPLETED. EARLY REMOVAL OF THE BASKET COULD RESULT IN BURNS.

Hot Water Light: Light illuminates when the water reaches the proper brewing temperature.

American Metal Ware® Tea Brewers

Page 4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents American Metal Ware Tea Brewers Page American Metal Ware Tea Brewers Electrical Requirements Set-Up / PositionWater Hook-Up Use Control Functions Initial Start-UpOperation AdjustmentsTimer Adjustment Thermostat Adjustment Cleaning ProceduresBypass Adjustment Cleaning After Each BrewDaily Cleaning ServiceWeekly Cleaning To Drain Water TankFigure E To Remove the Water Tank Heating ElementTroubleshooting Guide Filling Problems Tea-300 Isometric Tea-300 3-Gallon Dispenser Isometric Tea-300 Wiring Schematic

TEA-300 specifications

The Grindmaster TEA-300 is an innovative tea brewing machine designed for both commercial and home use, ensuring that tea enthusiasts can enjoy perfectly brewed tea every time. With a focus on quality, efficiency, and user-friendly features, the TEA-300 stands out in the crowded market of tea brewers.

One of the standout features of the Grindmaster TEA-300 is its precise temperature control system. This technology allows users to select the ideal brewing temperature for a wide range of tea leaves, from delicate green teas to robust black teas. The machine’s digital thermostat ensures that the water is heated to the exact temperature required, enhancing the flavor extraction and overall quality of the brew.

In addition to temperature control, the TEA-300 offers programmable brewing cycles. Users can easily customize their brewing time, which is crucial for achieving the perfect balance of flavors in each cup. This feature is especially beneficial for establishments that serve a variety of teas, as it allows baristas to adapt the brewing process according to the specific type of tea being prepared.

The Grindmaster TEA-300 also incorporates a built-in water filtration system, which ensures that the water used for brewing is pure and free from impurities. This not only improves the taste of the tea but also extends the life of the machine by reducing the buildup of mineral deposits. The filtration system is easy to maintain, ensuring that users can consistently enjoy high-quality tea without the hassle of frequent upkeep.

Another noteworthy characteristic of the TEA-300 is its energy efficiency. Designed with sustainability in mind, the machine utilizes energy-saving technology that reduces power consumption while maintaining optimal performance. This makes it a responsible choice for environmentally conscious consumers and businesses looking to minimize their ecological footprint.

The design of the Grindmaster TEA-300 is both sleek and functional. Its compact footprint allows it to fit easily into any kitchen or commercial space, while its intuitive interface makes it easy for users to navigate through the settings. The robust construction ensures durability, making it suitable for high-demand environments such as cafes, restaurants, and tea shops.

In summary, the Grindmaster TEA-300 is a top-of-the-line tea brewing machine that combines advanced technology, user-friendly features, and efficient design. With its precise temperature control, programmable brewing cycles, built-in water filtration, energy efficiency, and durable construction, it is an excellent choice for anyone looking to elevate their tea brewing experience. Whether for personal use or a bustling commercial setting, the TEA-300 promises to deliver consistently exceptional tea with every brew.
Top Page Image Contents