Manitowoc Ice Q manual Air-Cooled Baffle, Leveling Leg and Foot, Air Baffle

Page 17

Section 2

Installation Instructions

 

 

Leveling the Ice Storage Bin

1.Screw the leveling legs onto the bottom of the bin.

2.Screw the foot of each leg in as far as possible.

!Caution

The legs must be screwed in tightly to prevent them from bending.

3.Move the bin into its final position.

4.Level the bin to assure that the bin door closes and seals properly. Use a level on top of the bin. Turn each foot as necessary to level the bin.

NOTE: An optional caster assembly is available for use in place of the legs. Installation instructions are supplied with the casters.

THREAD LEVELING

LEG INTO BASE OF

CABINET

THREAD ‘FOOT’ IN AS

FAR AS POSSIBLE

SV1606

Leveling Leg and Foot

Air-Cooled Baffle

The air-cooled baffle prevents condenser air from recirculating. To install:

1.Remove the back panel screws next to the condenser.

2.Align the mounting holes in the air baffle with the screw holes and reinstall the screws.

AIR

BAFFLE

SCREWS

SV1607

Air Baffle

Part Number 000001114

2-7

Image 17
Contents Model Ice Machines Personnel Injury Potential Read These Before ProceedingTable of Contents Table of Contents Section Ice Machine Operation Section MaintenanceSection Before Calling for Service Table of Contents Model Numbers How to Read a Model NumberIce Cube Sizes Personal Injury PotentialGeneral Information Section Accessories Model/Serial Number Location Section General Information Model/Serial Number LocationWarranty Coverage General Information Section WarrantyIce Machine Dimension H Ice Machine DimensionsGeneral Q320/Q370/Q420 ICE MachinesQ280 Q1000 ICE Machines Installation Instructions SectionBin Model Dimension a Dimension B Ice Storage Bin DimensionsS320/S420 ICE Storage Bins S170/S400/S570 ICE Storage BinsBin Model Dimension a Width Dimension B Height SV1297 Ice Machine Heat of Rejection Installation Instructions Section Location of Ice MachineStacking Two Ice Machines on a Single Storage Bin Air Baffle Air-Cooled BaffleLeveling Leg and Foot Ground Fault Circuit Interupter Installation Instructions Section Electrical ServiceVoltage FUSE/CIRCUIT BreakerQ320/370/420 Ice Machines Self Contained ICE Machine 115/1/60 or 208-230/1/60 For United Kingdom OnlySelf Contained ICE Machine 208-230/3/60 Self Contained ICE Machine 230/1/50Ground To Separate Water Supply Cooling Tower Applications Water-Cooled ModelsWater Inlet Lines Drain ConnectionsWater Supply and Drain Line SIZING/CONNECTIONS Typical Water Supply Drain InstallationCondenser Bin DrainRemote ICE Machines Refrigerant Charge Typical Additional Refrigerant LabelRouting Line Sets Guidelines for Routing Line SetsCalculating Remote Condenser Installation Distances Remote Receiver Service Valve Connecting a Line SETBackseating the Receiver Service Valve Lengthening or Reducing Line SET LengthsInternal Condenser Volume WarrantyHead Pressure Control Valve FAN MotorTypical Single Circuit Remote Condenser Installation NON-MANITOWOC MULTI-CIRCUIT Condenser Sizing ChartAdditional Checks for Remote Models Installation Instructions Section Installation Check ListPotential Personal Injury Situation AuCS Automatic Cleaning SystemThis page Intentionally Left Blank Component Identification Typical Q450 Shown Component IdentificationWater Purge Initial START-UP or START-UP After Automatic SHUT-OFFRefrigeration System Start-Up Freeze Sequence 3. PrechillAutomatic SHUT-OFF 7. Automatic Shut-Off Harvest Sequence 5. Water PurgeHarvest Freeze Sequence Typical Q450 Shown Section Ice Machine Operation ICE Thickness Check Ice Machine Operation Section Operational ChecksWater Level Harvest Sequence Water Purge 10. Water Purge AdjustmentIce Machine Operation Section Cleaning Procedure Interior Cleaning and SanitizingModel Amount of Cleaner Remove the water curtainMaintenance Section Remove the water pump Remove the white vinyl water distribution tubingRemove the water level probe Water Pump RemovalSolution Type Mix a solution of sanitizer and warm waterSanitizer Oz 120 ml sanitizerSolution Type Water Mixed With Sanitizer Water Dump Valve Additional Component RemovalWater Inlet Valve Dump Valve Disassembly Cleaning the Condenser Maintenance Section Ice Machine InspectionExterior Cleaning Straighten Bent Condenser Fins Water-Cooled Condenser Water Regulating ValveAlphaSan SELF-CONTAINED AIR-COOLED ICE Machines Maintenance Section Removal from Service/WinterizationWATER-COOLED ICE Machines Pry Open the Water Regulating ValveProblem Possible Cause To Correct ChecklistSafety Limit Feature Before Calling for Service SectionSection Before Calling for Service Before Calling for Service Section Page Manitowoc ICE, INC
Related manuals
Manual 28 pages 13.75 Kb

Q specifications

Manitowoc Ice Q is a leading innovator in the ice-making industry, renowned for its cutting-edge technology and efficiency. This advanced ice machine is designed to meet the increasing demands of various commercial settings, from restaurants to hotels, catering businesses, and beyond. With a commitment to quality and sustainability, Manitowoc has developed the Ice Q to deliver high performance while minimizing environmental impact.

One of the standout features of the Manitowoc Ice Q is its ability to produce a variety of ice types. From traditional cubed ice to flaked and gourmet options, this machine ensures that businesses can cater to diverse customer preferences. The ice produced is not only visually appealing but also ideal for cooling beverages quickly and maintaining their quality.

The Manitowoc Ice Q utilizes SmartCube technology, which significantly enhances energy efficiency. This intelligent feature analyzes the ice-making process in real-time, adjusting water flow and freezing cycles to optimize energy consumption. With this technology, users can expect up to 20% savings on energy costs compared to conventional ice machines. Furthermore, the machine is designed with eco-friendly refrigerants, which further reduce its carbon footprint.

Another defining characteristic of the Ice Q is its user-friendly interface. The machine is equipped with a simple touchscreen control panel that allows operators to monitor performance effortlessly. Maintenance alerts and cleaning reminders ensure that users can keep the machine in peak condition, thus extending its lifespan and reducing downtime.

The compact design of the Manitowoc Ice Q makes it suitable for a variety of spaces, including those where floor space is at a premium. Despite its small footprint, the machine boasts a large storage capacity, allowing establishments to meet high ice demands without sacrificing performance.

Built with robust materials and advanced engineering, the Ice Q ensures durability and reliability. Its stainless steel construction is not only stylish but also resistant to corrosion, ensuring that the machine can withstand the rigors of daily use.

In summary, Manitowoc Ice Q represents a significant advancement in ice-making technology. With features like SmartCube efficiency, versatile ice production, user-friendly controls, compact design, and robust construction, it stands out as an essential solution for businesses looking to improve their ice supply while operating sustainably. Whether for rapid service in a busy bar or supplying ice for catered events, the Ice Q is designed to exceed expectations and deliver exceptional performance.