Manitowoc Ice Q manual Mix a solution of sanitizer and warm water, Solution Type, Sanitizer

Page 44

Maintenance

Section 4

 

 

Step 9 While components are soaking, use 1/2 of the cleaner/water solution to clean all foodzone surfaces of the ice machine and bin (or dispenser). Use a nylon brush or cloth to thoroughly clean the following ice machine areas:

•Side walls

•Base (bottom of the water trough)

•Interior of the water trough

•Evaporator cells and evaporator plastic parts - including top, bottom, and sides

•Bin or dispenser

•Ice machine top cover

Remove water trough drain plug and rinse all areas thoroughly with clean water. Reinstall water trough drain plug.

 

 

Clean/sanitize top,

 

 

bottom and sides

 

 

of evaporator.

 

 

Wipe bottom lip of

 

 

evaporator with a

 

 

sponge or cloth

 

 

soaked in cleaner

 

 

and then sanitizer

 

 

solution.

Step 10 Mix a solution of sanitizer and warm water.

Solution Type

Water

Mixed With

Sanitizer

6 gal. (23 l)

4 oz (120 ml) sanitizer

Step 11 Use 1/2 of the sanitizer/water solution to sanitize all removed components. Use a cloth or sponge to liberally apply the solution to all surfaces of the removed parts or soak the removed parts in the sanitizer/water solution. Do not rinse parts after sanitizing.

Step 12 Use 1/2 of the sanitizer/water solution to sanitize all foodzone surfaces of the ice machine and bin (or dispenser). Use a cloth or sponge to liberally apply the solution. Wipe all surfaces twice to ensure complete coverage with sanitizer solution. When sanitizing, pay particular attention to the following areas:

•Side walls

•Base (bottom of the water trough)

•Interior of water trough

•Evaporator cells and evaporator plastic parts - including top, bottom and sides

•Bin or dispenser

•Ice machine top cover

Do not rinse the sanitized areas. Remove the water trough drain plug and wipe with solution. When the sanitizer solution has drained from the trough, reinstall the water trough drain plug.

Step 13 Replace all removed components.

Step 14 Reapply power to the ice machine and place the toggle switch in the CLEAN position.

Step 15 Wait about two minutes or until water starts to flow over the evaporator. Add the proper amount of Manitowoc Ice Machine Sanitizer to the water trough by pouring between the water curtain and evaporator.

Model

Amount of Sanitizer

Q200 Q280 Q322 Q370

3 ounces (90 ml)

Q422 Q450 Q600 Q800

 

Q1000

 

Q1300 Q1600 Q1800

8.75 ounces (258 ml)

4-4

Part Number 000001114

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Model Ice Machines Read These Before Proceeding Personnel Injury PotentialTable of Contents Table of Contents Section Ice Machine Operation Section MaintenanceSection Before Calling for Service Table of Contents How to Read a Model Number Model NumbersIce Cube Sizes Personal Injury PotentialGeneral Information Section Accessories Section General Information Model/Serial Number Location Model/Serial Number LocationGeneral Information Section Warranty Warranty CoverageIce Machine Dimensions Ice Machine Dimension HGeneral Q320/Q370/Q420 ICE MachinesInstallation Instructions Section Q280 Q1000 ICE MachinesIce Storage Bin Dimensions Bin Model Dimension a Dimension BS320/S420 ICE Storage Bins S170/S400/S570 ICE Storage BinsBin Model Dimension a Width Dimension B Height SV1297 Ice Machine Heat of Rejection Installation Instructions Section Location of Ice MachineStacking Two Ice Machines on a Single Storage Bin Air Baffle Air-Cooled BaffleLeveling Leg and Foot Installation Instructions Section Electrical Service Ground Fault Circuit InterupterVoltage FUSE/CIRCUIT BreakerQ320/370/420 Ice Machines For United Kingdom Only Self Contained ICE Machine 115/1/60 or 208-230/1/60Self Contained ICE Machine 208-230/3/60 Self Contained ICE Machine 230/1/50Ground To Separate Cooling Tower Applications Water-Cooled Models Water SupplyWater Inlet Lines Drain ConnectionsTypical Water Supply Drain Installation Water Supply and Drain Line SIZING/CONNECTIONSCondenser Bin DrainTypical Additional Refrigerant Label Remote ICE Machines Refrigerant ChargeGuidelines for Routing Line Sets Routing Line SetsCalculating Remote Condenser Installation Distances Connecting a Line SET Remote Receiver Service ValveBackseating the Receiver Service Valve Lengthening or Reducing Line SET LengthsWarranty Internal Condenser VolumeHead Pressure Control Valve FAN MotorNON-MANITOWOC MULTI-CIRCUIT Condenser Sizing Chart Typical Single Circuit Remote Condenser InstallationInstallation Instructions Section Installation Check List Additional Checks for Remote ModelsAuCS Automatic Cleaning System Potential Personal Injury SituationThis page Intentionally Left Blank Component Identification Component Identification Typical Q450 ShownInitial START-UP or START-UP After Automatic SHUT-OFF Water PurgeRefrigeration System Start-Up Freeze Sequence 3. PrechillAutomatic SHUT-OFF 7. Automatic Shut-Off Harvest Sequence 5. Water PurgeHarvest Freeze Sequence Typical Q450 Shown Section Ice Machine Operation ICE Thickness Check Ice Machine Operation Section Operational ChecksWater Level 10. Water Purge Adjustment Harvest Sequence Water PurgeIce Machine Operation Section Interior Cleaning and Sanitizing Cleaning ProcedureModel Amount of Cleaner Remove the water curtainMaintenance Section Remove the white vinyl water distribution tubing Remove the water pumpRemove the water level probe Water Pump RemovalMix a solution of sanitizer and warm water Solution TypeSanitizer Oz 120 ml sanitizerSolution Type Water Mixed With Sanitizer Water Dump Valve Additional Component RemovalWater Inlet Valve Dump Valve Disassembly Cleaning the Condenser Maintenance Section Ice Machine InspectionExterior Cleaning Straighten Bent Condenser Fins Water-Cooled Condenser Water Regulating ValveAlphaSan Maintenance Section Removal from Service/Winterization SELF-CONTAINED AIR-COOLED ICE MachinesWATER-COOLED ICE Machines Pry Open the Water Regulating ValveChecklist Problem Possible Cause To CorrectBefore Calling for Service Section Safety Limit FeatureSection Before Calling for Service Before Calling for Service Section Page Manitowoc ICE, INC
Related manuals
Manual 28 pages 13.75 Kb

Q specifications

Manitowoc Ice Q is a leading innovator in the ice-making industry, renowned for its cutting-edge technology and efficiency. This advanced ice machine is designed to meet the increasing demands of various commercial settings, from restaurants to hotels, catering businesses, and beyond. With a commitment to quality and sustainability, Manitowoc has developed the Ice Q to deliver high performance while minimizing environmental impact.

One of the standout features of the Manitowoc Ice Q is its ability to produce a variety of ice types. From traditional cubed ice to flaked and gourmet options, this machine ensures that businesses can cater to diverse customer preferences. The ice produced is not only visually appealing but also ideal for cooling beverages quickly and maintaining their quality.

The Manitowoc Ice Q utilizes SmartCube technology, which significantly enhances energy efficiency. This intelligent feature analyzes the ice-making process in real-time, adjusting water flow and freezing cycles to optimize energy consumption. With this technology, users can expect up to 20% savings on energy costs compared to conventional ice machines. Furthermore, the machine is designed with eco-friendly refrigerants, which further reduce its carbon footprint.

Another defining characteristic of the Ice Q is its user-friendly interface. The machine is equipped with a simple touchscreen control panel that allows operators to monitor performance effortlessly. Maintenance alerts and cleaning reminders ensure that users can keep the machine in peak condition, thus extending its lifespan and reducing downtime.

The compact design of the Manitowoc Ice Q makes it suitable for a variety of spaces, including those where floor space is at a premium. Despite its small footprint, the machine boasts a large storage capacity, allowing establishments to meet high ice demands without sacrificing performance.

Built with robust materials and advanced engineering, the Ice Q ensures durability and reliability. Its stainless steel construction is not only stylish but also resistant to corrosion, ensuring that the machine can withstand the rigors of daily use.

In summary, Manitowoc Ice Q represents a significant advancement in ice-making technology. With features like SmartCube efficiency, versatile ice production, user-friendly controls, compact design, and robust construction, it stands out as an essential solution for businesses looking to improve their ice supply while operating sustainably. Whether for rapid service in a busy bar or supplying ice for catered events, the Ice Q is designed to exceed expectations and deliver exceptional performance.
Top Page Image Contents