Omega OA138X manual Installation

Page 5

OA138X(¿ )-1B4HOA 02.9.311:29AM ˘ ` 4

INSTALLATION

1

Examine the oven after unpacking.

 

Check for damage such as a misaligned door, broken door or dent in the cavity.

 

If any damage is visible, DO NOT INSTALL, and notify your dealer immediately.

2

Level, flat location.

 

Install the microwave oven on a level, flat surface.

3

Ventilation

 

Do not block air vents. If they are blocked during operation, the oven may overheat and eventually

 

cause a failure. For proper ventilation, allow 4 inches of space between oven top, sides, rear and

 

adjacent surfaces.

4

Away from radio and TV sets

 

Poor television reception and radio interference may result if the oven is located close to a TV, radio,

 

antenna, feeder, etc. Place the oven as far from them as possible.

5

Away from heating appliances and water taps

 

Keep the oven away from heat, steam or splashing liquids. These things can adversely affect oven

 

wiring and contacts.

6

Power supply

 

This microwave oven requires a power supply of approximately 15 Amperes, 120 Volts, 60 Hz and a

 

grounded outlet. A short power cord is provided to reduce the risk of the user becoming entangled in

 

or tripping over a longer cord. Longer cord sets or extension cords are available and may be used if

 

care is exercised in their use.

 

If an extension cord is used, the marked electrical rating of the cord should be at least as great as the

 

electrical rating of the oven in their use.

 

The Extension cord must be a grounding-type 3-wire cord. The longer cord should be arranged so

 

that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped

 

over unintentionally.

7

The minimum height of free space necessary above the top surface of the oven is 100mm.

When use 3-pronged plug

3-prong Receptacle

When use grounding adaptor, make sure the receptacle box is fully grounded.

Receptacle

Box cover

3-prong plug

Grounding Lead

Receptacle Box Cover

Grounding Receptacle

Adaptor

“THE CANADIAN ELECTRICAL CODE DOES NOT ALLOW THE USE OF THE GROUNDING ADAPTOR”

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Microwave Oven Table of Contents See Grounding Instructions found on Important Safety InstructionsGrounding Instructions Installation Specifications Roller guide Supports the glass cooking tray Features DiagramClock Used to set clock Features DiagramOperation Procedure Controls Setting the ClockTime Defrosting ClockMeat Weight DefrostingPoultry FishTouch Power pad PowerCooking in ONE Stage Cooking in TWO StagesHOW to USE AS a Minute Timer Kitchen Kitchen Timer ModeHOW to USE to Delay the Start of Cooking Kitchen Timer HOW to USE to SET a Holding Time Kitchen TimerONE Touch Cooking Speedy CookSpeedy Cook PopcornDinner Plate BeverageFresh Vegetable Frozen VegetableTo Stop the Oven While the Oven is Operating Child Safety LockLESS, More Utensil Test Cooking UtensilsStirring Cooking TechniquesGeneral Information Defrosting GuideBeef Defrosting ChartPork PoultryMeat Cooking ChartFresh Fish VegetableReheating Chart Arrange, on paper tower lined paper Fried chickenPlate, covered with paper tower Arrange on microwave oven roastingGlass Tray Care of Your Microwave OvenRoller Guide General Use USE Your Microwave Oven SafelyQuestions and Answers Do not Attempt to Service the Oven Yourself Weight & Measure Conversion ChartBefore YOU Call for Service

OA138X specifications

The Omega OA138X is a highly versatile and innovative technology that stands out in the market for its advanced features and robust performance. This device is widely recognized for its blend of precision, efficiency, and user-friendly design, making it a popular choice among professionals and enthusiasts alike.

One of the standout features of the Omega OA138X is its high-accuracy measurement capability. Engineered with advanced sensing technology, it delivers precise readings across a broad range of calibration parameters. This ensures that users can rely on its data, making it an ideal tool for applications in laboratories, industrial settings, and research environments.

The OA138X incorporates state-of-the-art digital technology which enhances ease of use. Its intuitive interface allows users to navigate through various settings effortlessly, ensuring a smooth operational experience. The clear display provides real-time data visualization, enabling users to monitor readings at a glance.

Another notable characteristic of the Omega OA138X is its robust construction. Designed for durability, it can withstand the rigors of demanding work environments without compromising on performance. This resilience is a significant advantage for users in industries where equipment is subject to harsh conditions.

In terms of connectivity, the Omega OA138X supports various communication protocols, facilitating easy integration with other devices and systems. This feature is particularly useful in automated setups, allowing seamless data transfer and control, which increases efficiency and reduces the risk of errors.

The device also boasts advanced safety features designed to protect both the equipment and the operator. Built-in safeguards ensure that measurements are taken accurately while minimizing the risk of mishaps, making it suitable for environments where safety is a top priority.

In conclusion, the Omega OA138X is an exemplary model in the realm of precision measurement devices. Its combination of accuracy, user-friendly technology, durability, and connectivity makes it a reliable choice for a wide array of applications. Whether you are engaged in research, industrial operations, or quality control, the OA138X delivers unparalleled performance that meets and exceeds the expectations of its users.
Top Page Image Contents