Omega OA138X manual Operation Procedure

Page 9
The display will show ":0" when the oven is plugged in.
The oven light is on when the microwave oven is operating or the door is opened.
The oven door can be opened at any time during operation by opening the door. The oven will automatically shut off.
Each time a pad is touched, a BEEP will sound to acknowledge the touch.

OA138X(¿ )-1B4HOA 02.9.311:29AM ˘ ` 8

OPERATION PROCEDURE

This section includes useful information about oven operation.

1.Plug power supply cord into a standard 3- pronged 15 Amp, 120V AC 60Hz power outlet.

2.After placing the food in a suitable container, open the oven door and put it on the glass tray. The glass tray and roller guide must always be in place during cooking.

3.Shut the door. Make sure that it is firmly closed.

1

2

3

4 The oven automatically cooks on full power unless set to a lower power level.

5

6 Time clock returns to the present time when the cooking time ends.

7

8

When the STOP/CLEAR pad is touched during the oven operation, the oven stops cooking and all information retained.

To erase all information (except the present time), touch the STOP/CLEAR pad once more. If the oven door is opened during the oven operation, all information is retained.

If the START pad is touched and the oven does not operate, check the area between the door and door seal for obstructions and make sure the door is closed securely.

The oven will not start cooking until the door is completely closed or the program has been reset.

Make sure the oven is properly installed and plugged into the electrical outlet.

WATTAGE OUTPUT CHART

•The power-level is set by touching the POWER pad. The chart shows the display, the power level and the percentage of power.

Touch POWER pad

Power Level (Display)

Approximate Percentage of Power

 

 

 

once

P-HI

100%

 

 

 

twice

P-90

90%

 

 

 

3 times

P-80

80%

 

 

 

4 times

P-70

70%

 

 

 

5 times

P-60

60%

 

 

 

6 times

P-50

50%

 

 

 

7 times

P-40

40%

 

 

 

8 times

P-30

30%

 

 

 

9 times

P-20

20%

 

 

 

10 times

P-10

10%

 

 

 

11 times

P-00

0%

 

 

 

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Microwave Oven Table of Contents See Grounding Instructions found on Important Safety InstructionsGrounding Instructions Installation Specifications Roller guide Supports the glass cooking tray Features DiagramClock Used to set clock Features DiagramOperation Procedure Controls Setting the ClockTime Defrosting ClockMeat Weight DefrostingPoultry FishTouch Power pad PowerCooking in ONE Stage Cooking in TWO StagesHOW to USE AS a Minute Timer Kitchen Kitchen Timer ModeHOW to USE to Delay the Start of Cooking Kitchen Timer HOW to USE to SET a Holding Time Kitchen TimerONE Touch Cooking Speedy CookSpeedy Cook PopcornDinner Plate BeverageFresh Vegetable Frozen VegetableChild Safety Lock LESS, MoreTo Stop the Oven While the Oven is Operating Utensil Test Cooking UtensilsStirring Cooking TechniquesGeneral Information Defrosting GuideBeef Defrosting ChartPork PoultryMeat Cooking ChartFresh Fish VegetableReheating Chart Arrange, on paper tower lined paper Fried chickenPlate, covered with paper tower Arrange on microwave oven roastingCare of Your Microwave Oven Roller GuideGlass Tray General Use USE Your Microwave Oven SafelyQuestions and Answers Weight & Measure Conversion Chart Before YOU Call for ServiceDo not Attempt to Service the Oven Yourself

OA138X specifications

The Omega OA138X is a highly versatile and innovative technology that stands out in the market for its advanced features and robust performance. This device is widely recognized for its blend of precision, efficiency, and user-friendly design, making it a popular choice among professionals and enthusiasts alike.

One of the standout features of the Omega OA138X is its high-accuracy measurement capability. Engineered with advanced sensing technology, it delivers precise readings across a broad range of calibration parameters. This ensures that users can rely on its data, making it an ideal tool for applications in laboratories, industrial settings, and research environments.

The OA138X incorporates state-of-the-art digital technology which enhances ease of use. Its intuitive interface allows users to navigate through various settings effortlessly, ensuring a smooth operational experience. The clear display provides real-time data visualization, enabling users to monitor readings at a glance.

Another notable characteristic of the Omega OA138X is its robust construction. Designed for durability, it can withstand the rigors of demanding work environments without compromising on performance. This resilience is a significant advantage for users in industries where equipment is subject to harsh conditions.

In terms of connectivity, the Omega OA138X supports various communication protocols, facilitating easy integration with other devices and systems. This feature is particularly useful in automated setups, allowing seamless data transfer and control, which increases efficiency and reduces the risk of errors.

The device also boasts advanced safety features designed to protect both the equipment and the operator. Built-in safeguards ensure that measurements are taken accurately while minimizing the risk of mishaps, making it suitable for environments where safety is a top priority.

In conclusion, the Omega OA138X is an exemplary model in the realm of precision measurement devices. Its combination of accuracy, user-friendly technology, durability, and connectivity makes it a reliable choice for a wide array of applications. Whether you are engaged in research, industrial operations, or quality control, the OA138X delivers unparalleled performance that meets and exceeds the expectations of its users.
Top Page Image Contents