GE Monogram 164D3333P027 manual Control knobs Burners, Using Your Cooktop

Control knobs

Burners

Using Your Cooktop

Stainless Steel Cooktop

The control knobs are in front of the burner,

HI LITE

grille or griddle (on some models) they control.

The burners have an infinite number of heat settings as there are no fixed positions between HI and LO.

To turn ON a burner, push the control in, then turn it counterclockwise to the LITE position.

Check to be sure the burner you turned on is the one you want to use.

You will hear the ignitor click. When the gas is ignited all around the burner and into the central simmer burner below the simmer cap, turn the knob back to the desired setting.

Push the control in and turn it counterclockwise

When using the simmer burner always ensureto the LITE position. that it lights from the main burner.

Your new professional gas cooktop is equipped
with burners typical of those used in restaurants.	Simmer burner	Simmer cap
These burners are designed in three pieces for
easy cleaning and control.
The center, smaller cap covers and protects the
simmer burner from boilovers that could put the
flame out. This cap also spreads the simmer
burner heat out to avoid too much heat being
concentrated on the center of the pan.
The simmer burner is always on when the burner
is in use. The burner should never be operated if
the simmer cap is not in place.
The outer cap and brass port ring constitute the	Brass port ring		Outer ring
main burner and are in operation between the HI
and LO settings.
The burners have electronic spark ignition to
eliminate continuously burning pilots. When the
outer ring is on and the flame is blown out, it will
relight. The burners are rated at 15,000 BTU
around the outer ring. When turned to the
simmer setting, only the center of the burner is
lit, and it is rated at 500 BTU.

9