Shelves and Bins
Stainless Steel Refrigerator
Fresh food compartment door bins and freezer door
Large Bins
The larger fresh food compartment door bins and freezer
To remove: Lift the front of the bin straight up, then lift up and out.
To replace or relocate: Engage the back side of the bin in the molded supports of the door. Then push down on the front of the bin.
Bin will lock in place.
Snugger
Fresh food compartment door bin
Small Bins |
|
To remove: Lift the front of the bin straight |
|
up, then out. |
|
To replace: Position the bin above the |
|
rectangular molded supports on the door. |
|
Then slide the bin down onto the support |
|
to lock it in place. |
|
The snugger helps prevent tipping, spilling | Freezer |
or sliding of small items stored on the door |
|
shelf. Place a finger on either side of the |
|
snugger near the rear and move it back |
|
and forth to fit your needs. |
|
Slide-out spillproof shelf
The
To remove:
Slide the shelf out until it reaches the stop, then press down on the tab and slide the shelf straight out.
Press tab and pull shelf
forward to remove
To replace or relocate:
Line the shelf up with the supports and slide it into place. The shelf can be repositioned when the door is at 90° or more. To reposition the shelf, slide the shelf past the stops and angle downward. Slide shelf down to the desired position, line up with the supports and slide into place.
Make sure you push the shelves all the way back in before you close the door.
13