Russound ST2S installation manual Programming for CAV6.6 USE, Source Configuration Note

Page 36

ST2S TUNER PROGRAMMING

PROGRAMMING FOR CAV6.6 USE

NOTE: The CAV6.6 (Rev. 3) must have firmware version 2.01.16 or higher, CAV6.6 (Rev. 4) must have firmware version 3.01.10 or higher,and UNO-S2 firmware must be version 3.01.01 or higher to control the ST2S Tuner. Use the System Info Menu of the CAV6.6 to check the firmware version. If the firmware is not the proper revision as noted here, visit the Document Center at www.russound.com to obtain the latest version.

To Program the CAV6.6 to operate with the ST2S Tuner: (refer to the CAV6.6 Instruction Manual for details)

1.Enter the Setup Menu by pressing the Setup button on the side of the UNO-S2 keypad.

2.SOURCE SETUP will appear. Enter the Source Setup Menu by pressing the Play button on the UNO-S2 keypad.

3.BASIC SETUP will appear. Enter the Basic Setup Menu by pressing the Play button again.

4.SOURCE NUM will appear. Use + and - buttons to select the source number to which Tuner 1 (SIR- IUS) is connected. Press the Play button to enter your choice.

5.SOURCE NAME will appear. Use + and - buttons to select the name for the source (e.g., Tuner 1 or SIRIUS). Press the Play button to enter your choice.

6.COMMAND TYPE will appear. Select PERIPHERAL from the list. Press the Play button to enter this choice.

7.SAVE CHANGES? appears. Select “Yes” and press the Play button to save changes.

8.SOURCE NUM appears again. Repeat steps 4 through 7 to configure the second tuner.

9.Press the Setup button three times to back out of the Installation Menu.

Source Configuration Note:

When the ST2S Tuner is used with the CAV6.6 or other RNET controller, it is configured as an RNET command type “Peripheral” and is connected via the RNET bus. This makes the tuner behave as a fully integrated device with UNO-S2 keypad support. Each tuner must be set up with a unique source number (1 - 6) or unassigned. An unassigned tuner is not controlled by the RNET bus.

Each of the ST2S modules can be configured as source number “unassigned” if the module is used in another system (e.g., home theater) or will not be used as a source in the RNET system.

Key Function Note:

When using the tuner with the CAV6.6-S2 system, do not reassign keypad and remote buttons for tuner control in the CAV6.6 Key Configuration Menu. When the tuner is assigned the “Peripheral” com- mand type in the CAV6.6 Setup Menu, key assignments and functions are automatically assigned and will operate as shown in the preceding UNO-S2 keypad and UNO-LRC1 remote diagrams.

36

Image 36
Contents ST2S Important Safeguards PrecautionsTable of Contents Introduction DescriptionInstallation Applications Component Guide ST2S Front PanelST2S Rear Panel ST2 Smart TunerST2-RC Remote Control Seek UP/DOWNST2S Setup and Connections Basic ConnectionsST2-KP Connections to ST2S Tuner Non-RNET Systems Source Connections with CAi Series Controller/AmplifierCAV6.6 Series Connections UNO-S2Connecting an Indoor or Outdoor AM/FM Antenna Antenna ConnectionsAM Antenna FM AntennaSirius Antenna Installation Sirius Signal Strength ModeSirius Antenna Positioning Grounding an Outdoor Antenna ST2S Operation Sirius Radio OverviewSirius Radio Activation Sirius Radio DisplaysSirius Radio Modes Sirius Radio ModesFor all Sirius Modes Preset default Mode Category Search Mode 1.CAT SearchNow Playing Mode 2.NOW Playng Display Preference Mode 3.DSPLY Pref Sirius ID Mode 4.SIRIUS IDChannel Lock Mode 5.CHAN Lock Front Panel Controls Front Panel OperationST2-RC Remote Control Operation Turning the unit on/offFrequency Seek AM/FM only Saving FavoritesST2-KP Keypad Controls ST2-KP Keypad OperationUNO-S2 Keypad Controls with CAV6.6 CAV6.6-UNO-S2 Keypad OperationFrequency Scan AM/FM only MuteEspn Radio UNO-LRC1 Remote Control with CAV6.6 UNO-LRC1 Remote Control OperationPlay ST2 Tuner Setup Menu ST2 Chassis Setup MenuUpdate Firmware Chassis ST2S Tuner ProgrammingST2 Chassis Setup Procedures Factory Initialization ChassisTuner Setup Menu for Sirius System Info ChassisMemory Name Sirius Bank Name SiriusSirius Setup Menu Memory Name Procedure Diagnostics Sirius Controller ID SiriusSystem Info Sirius Tuner Setup Menu for AM/FM Memory Name AM/FMBank Name AM/FM Region AM/FMBackup and Restore AM/FM Setup MenuSource Configuration Note Programming for CAV6.6 USETechnical Specifications ST2S Smart TunerWarranty & Repair Page Radio Inc 28-1190 07/26/05

ST2S specifications

The Russound ST2S is a modern, versatile streaming audio tuner designed to enhance the audio experience in both residential and commercial settings. With an emphasis on quality sound, ease of use, and extensive connectivity options, the ST2S is a powerful device that caters to the needs of any audio enthusiast.

One of the standout features of the Russound ST2S is its ability to stream music from a wide range of sources. This includes internet radio, popular streaming services like Spotify, Tidal, and Pandora, as well as local network sources via DLNA and UPnP protocols. This broad compatibility ensures that users have access to an almost limitless library of music, making it easier than ever to enjoy their favorite tunes.

The ST2S is equipped with advanced audio technologies to deliver superior sound quality. It incorporates high-resolution audio support, allowing users to enjoy their music in crisp detail. Additionally, the tuner features a built-in digital-to-analog converter (DAC) that enhances sound clarity, ensuring that even the smallest nuances in audio are captured and delivered faithfully.

Ease of use is another hallmark of the Russound ST2S. The device comes with an intuitive mobile app that allows users to control their audio experience from their smartphones or tablets, facilitating seamless navigation through playlists and radio stations. The app also enables users to create and manage custom playlists, personalize their listening experience, and easily switch between sources.

Connectivity options are extensive, making the ST2S a flexible addition to any audio setup. It features both analog and digital outputs, including coaxial and optical outputs, ensuring compatibility with a wide range of existing audio equipment. Additionally, the ST2S can be easily integrated into multi-room audio systems, providing synchronized audio throughout the home or business.

The ST2S also boasts an elegant design that can blend seamlessly with any decor. Its compact size allows for easy placement in various environments, whether mounted on a shelf or installed as part of a built-in system.

In summary, the Russound ST2S is a cutting-edge streaming audio tuner that combines advanced technology, extensive connectivity, and user-friendly controls to deliver an exceptional audio experience. With its versatility and high-quality sound, the ST2S is an ideal choice for anyone looking to elevate their audio enjoyment. Whether you're a casual listener or a devoted audiophile, the ST2S offers features that meet diverse listening needs while ensuring accessibility and ease of use.