3M 39600 manual Specifications

Specifications

1.Power Requirements:

Electrical – 115 VAC, 60 Hz, 3.8 A

These machines are equipped with an 2.4 m [8 foot] standard neoprene covered power cord and a grounded plug.

Contact your 3M Representative for power requirements not listed above.

2.Operating Rate:

Belt speed is 0.40 m/s [78 ft/min]

3.Operating Conditions:

Use in dry, relatively clean environments at

5o to 40o C [40o to 105o F] with clean, dry boxes.

Important – Machine should not be washed down or subjected to conditions causing moisture condensation on components.

4.Tape:

ScotchTM brand pressure-sensitive film box sealing tapes.

(Specifications continued on next page)

5.Tape Width:

Minimum – 48 mm [2 inches] Maximum – 72 mm [3 inches]

6.Tape Roll Diameter:

Up to 405 mm [16 inches] maximum on a 76.2 mm [3 inches] diameter core. (Accommodates all system roll lengths of ScotchTM brand film tapes.)

7.Tape Leg Length (Standard):

70 mm ± 6 mm [2-3/4 inches ±1/4 inch]

Tape Leg Length (Optional):

48 mm ± 6 mm [2 inches ±1/4 inch]

(To change tape leg length to 48 mm [2 inches], see "Special Set-Up Procedures", page 25.)

8.Box Board:

Style – regular slotted containers – RSC Bursting test –125 to 275 P.S.I. single wall or double wall B or C flute.

7