Russound CAM6.6T Forms Pages, IR Device Codes Pages, Key Functions Pages, Source Names Pages

Page 46

INSTALLER

SYSTEM PROGRAMMING OVERVIEW

This manual includes items that are designed to assist in the programming process.

Forms (Pages 106-108)

Three blank reproducible forms are included as planning tools when determining sources, settings and zone preferences. The Source and Zone Information forms and the Macro Editor form should be completed before programming and referred to during the installation menu process. This speeds up programming time and reduces missed or incorrect entries. These forms also serve as system refer- ence documents if future troubleshooting is needed.

IR Device Codes (Pages 78-81)

This list of command type IR device codes reflects the built-in IR codes in the CAM6.6 library. During programming, these codes will be entered for each source at the “Device Code” prompt. If a code is not listed for a source, the Learn IR procedure is available to learn in and centrally store IR codes.

(Note: Device codes for Phono, DAT and Tape are Learned Only)

Key Functions (Pages 82-103)

This list of key functions identifies what IR codes are supported for each command type (source) by the built-in library. “Learned Only” indicates that this function is not supported and must be learned into the CAM6.6. This list of key functions reflects the different available key functions associated with what you see on the LCD panel when performing the Key Configuration procedure in the Installation Menu. The list of functions corresponds with the command types above (e.g., CD, DSS, etc.).

Source Names (Pages 104-105)

A list of assignable Source Names is provided for advance selection and source form completion before programming.

Flow Charts (Pages 64-76)

Installation Menu flow charts provide a graphical representation of the programming process.

Installation Menu (Pages 49-63)

The Installation Menu provides the step-by-step complete programming procedure for the keypad and the controller.

Although you can begin programming at any point within the Installation Menu, the following sequence is recommended for initial installations, as it progresses from the most basic requirements to the more advanced features.

1. Controller Setup (CTRLR SETUP) (Page 58-59)

This procedure sets the controller ID number within the system. This number must be manually set when multiple CAM6.6’s are linked through RNET within one system. This procedure is not necessary for systems with only one CAM6.6.

2. Number of Sources (# of Sources/SOURCE SETUP) (Page 57)

This procedure sets the number of sources used in the system. This prevents the user from selecting a source input that is not used.

46

Image 46
Contents CAM6.6T Important Safeguards Table of Contents Reference Section Do Not Disturb Party ModeFavorites Internal SourceComponent Guide Main Power and Zone StatusCAM6.6 Controller-Front Panel 102.5 UNO-S1 KeypadCD Player UNO-S2 KeypadUNO-TS2 Touchscreen SRC2 Remote Control Operation UNO-S1 Keypad Button FunctionParty Party Mode Master or Off User Menu SettingsFeature and Setting UNO-S1 User Menu OperationUNO-S2 Keypad Button Function F1 and F2 ButtonsTreble Feature and Setting 1. BassUNO-S2 User Menu Operation BalanceUNO-TS2 Touchscreen Button Function Source Control ScreensUNO-TS2 Setting Preferences FeaturesUNO-S1 Keypad Control of Tuner Internal Source AM/FM TunerUNO-S1 Keypad Control UNO-S2 Keypad Control UNO-S2 Keypad Control of Tuner MHz FM UNO-S2 Keypad ControlLocal Distant Reception UNO-TS2 Touchscreen Control UNO-TS2 Control of TunerFrequency Seek and Scan Stereo Mono OutputUNO-TS2 Touchscreen Control Banks and Memory PresetsAM/FM Tuner Advanced Features Numeric Station/Channel SelectionSRC2 Remote Control SRC2 Control of Tuner Bank/Memory PresetsSRC2 Remote Control Setup Menu Flow Charts Keypad InstallationInstallation Menu Setup FormsGetting Started Tools needed for installationSystem Installation Considerations Unpacking the System ComponentsCAM6.6 Controller-Rear Panel Installer UNO-S2 Keypad OS Update Port UNO-S1 Keypad UNO Keypad Update PortUNO-TS2 Touchscreen UNO-S2 UNO-S1 UNO Keypad-Rear PanelUNO-TS2 Wiring Instructions CAT-5 Wire Color TypeIR Receiver Connection UNO Keypad Installation Keypad LocationUNO Keypad Port Connection Source IR Connections Source Audio and IR Input ConnectionsSource Audio Connections CAM6.6T with Optional Internal Source AM/FM TunerCommon IR Connection Common IR ConnectionsSpeaker Connections Zone Fixed/Variable Audio Outputs 12VDC Home Theater Trigger 12VDC Home Theater Trigger In/Out12VDC 100mA Trigger Out 12VDC Mute Trigger 12VDC Mute Trigger In/Out12VDC Mute Trigger Out Rnet Link In and Link Out RS-232 Interface AM Antenna Optional Internal Source AM/FM Tuner AntennasFM Antenna Connecting an Alternate Outdoor Antenna for AM/FM Grounding Outdoor Antennas Grounding an Outdoor AntennaInitial Install Test Controller Setup Ctrlr Setup Flow Charts PagesInstallation Menu Pages Number of Sources # of Sources/SOURCE SetupSource Volume Trim Source Setup Basic Setup Source Setup PagesPeripheral Setup Pages 49-51 for Optional Internal Source Numeric IR Source Setup PagesButton Function UNO-S1 UNO-S2UNO-S1 Keypad Five-character Display Memory Name Memory #Bank # All controllers Are you sure? Sure? Please Wait Cycle PowerBank Name EuroVersion Build TimeBuild Date Source NUMSelect the name for the source e.g., DVD, Aux 2, Jazz, etc Auto PLAY? Save CHANGES?Source Name Device CodeKEY Function Trim LevelNumeric Text Command TypeHighest NUM Prefix CMDSRC SEL CMD SrcSC Suffix CMD# of Sources #Srcs Master Enable Syson EnableParty Enable Mute EnableFactory Init Installation MenuPower on CMD OnCmd FInitSelected Default Deflt Selected Macro Macro LEARN/DELETE KEY Function fLearned SRC Test IR?Macro ID Command NUMSelected Delay Macro Name#CONTROLLERS Setup Menu Flow Charts Installer Installer Installer Installer Installer Installer Installer Installer Installer Installer Installer Installer UNO Keypad Diagnostics Menu Device Codes for TVs Device Codes for CableDevice Codes for SAT/DSS Device Codes for Cable cont’dDevice Codes for Video Acc Device Codes for VCRsDevice Codes for DVD Players Device Codes for VCRs cont’dDevice Codes for Laser Disc Players Device Codes for Tuner/AmpDevice Codes for CD Players Device Codes for Amp and Misc. AudioDevice Codes for Home Control KEY Codes TV Hdtv KEY Function UNO-S1 TV HdtvSAP SAP, CC KEY Codes Cable KEY Function UNO-S1 CableSAP KEY Codes Video ACC KEY Function UNO-S1 Video ACCLanguage, MTS KEY Codes SAT/DSS KEY Function UNO-S1 SAT/DSSAlt/Audio,Lang.,CC KEY Codes VCR KEY Function UNO-S1 VCRMenu Back Clear Fav Channel FavCh KEY Codes Laser Disc KEY Function UNO-S1 Laser DiscSubtitle, CC KEY Codes DVD KEY Function UNO-S1 DVDFormat Wide,Zoom,Aspect KEY Codes Receiver KEY Function UNO-S1 ReceiverDVD, LD KEY Codes AMP/MISC Audio KEY Function UNO-S1 AMP/MISC AudioTAPE, MD KEY Codes CD KEY Function UNO-S1Input Tape, MD KEY Codes Home Control KEY Function UNO-S1 Home ControlInput Source/Scene Source Names UNO-S1 UNO-S2Tivo Setup Forms Mute 108 Sample Configurations Multiple Controllers with ONE TunerMultiple Controllers with ST2 Dual Tuner ST2 Dual Tuner Back PanelMultiple Controllers with Three Tuners ST2 Dual Tuner Back PanelTechnical Specifications Warranty & Repair 114 115 For use with CAM6.6 Rev Hardware

CAM6.6, CAM6.6T specifications

The Russound CAM6.6 and CAM6.6T are premium multi-zone audio distribution systems designed for both residential and commercial environments. With their capability to deliver exceptional sound quality across multiple zones simultaneously, these systems prove to be an excellent solution for music enthusiasts and audiophiles alike.

One of the standout features of the CAM6.6 series is its ability to support six independent zones, allowing users to enjoy different audio sources in each zone simultaneously. This flexibility is complemented by the inclusion of built-in Bluetooth, enabling easy streaming of music from smartphones, tablets, and other devices. Users can also access a wide array of streaming services, enhancing the listening experience and making music more accessible.

Both models leverage advanced digital signal processing (DSP) technology, which ensures high fidelity and precise sound reproduction. This technology minimizes distortion and optimizes audio delivery, catering to various speaker types and settings. Furthermore, the CAM6.6 models support a multitude of audio formats, including high-resolution files, allowing for a versatile listening experience tailored to individual preferences.

Another significant characteristic of the Russound CAM6.6 and CAM6.6T systems is their ease of integration with existing home automation systems. They can seamlessly work with third-party devices, such as control systems and smart home technologies, empowering users to manage their audio systems through intuitive interfaces and mobile applications. The CAM6.6T variant even includes a built-in thermostat, adding to its functionality and making it a valuable component of a smart home ecosystem.

Installation and setup are simplified by a user-friendly interface and comprehensive configuration options. The systems feature a powerful amplifier capable of driving multiple speakers efficiently, ensuring consistent sound quality throughout the coverage area. Additionally, the CAM6.6 and CAM6.6T offer various input options, including line-level inputs and speaker-level outputs, making it easy to connect to other audio sources and devices.

In summary, the Russound CAM6.6 and CAM6.6T are outstanding audio distribution solutions, known for their flexibility, advanced technology, and user-friendly design. With their robust features and excellent sound quality, they cater to the diverse needs of modern audio enthusiasts, providing an immersive and dynamic audio experience for any setting.