INSTALLER
INSTALLATION MENU
SYSTEM INFO (SInfo)
System Info shows the tuner’s manufacturing build properties. See Periph Setup - Flow Chart on
page 65
BUILD TIME (BTime) |
| BUILD DATE (BDate) |
| VERSION (Ver) |
| |
|
|
| ||||
1. | BUILD TIME |
| Displays the firmware Build Time of the tuner. | |||
| (BTime) |
|
|
|
|
|
2. | BUILD DATE |
| Displays the firmware Build Date of the tuner. | |||
| (BDate) |
|
|
|
|
|
3. | VERSION |
| Displays the firmware version of the tuner. | |||
| (Ver) |
|
|
|
|
|
SOURCE SETUP (SrcSu)
Source Setup allows the system’s sources to be configured.
The following items can be found in the SOURCE SETUP menu:
BASIC SETUP (BasSu) KEY CONFIG (KeyCf) SOURCE NAMES (SrcNm)
SRC VOL TRIM (SrcVT) NUMERIC IR (NumIR) SRC SEL CMD (SrcSC)
# OF SOURCES (#Srcs)
BASIC SETUP (BasSu)
NOTE: The BASIC SETUP procedure should be performed for each source before proceeding to other source setting changes.
Note: If the CAM6.6 has an optional internal source installed, it is
This procedure uses
1. SOURCE NUM – | Select the source to be configured. |
(Src #) | (continued) |
51