Jackson LT-3, HT-2, HT-1, LT-1 technical manual

Page 9

SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS

INSTALLATION/OPERATION INSTRUCTIONS HT-1 & HT-2 DISPENSERS

Mount the chemical dispenser unit in a convienent location on the wall.

VERY IMPORTANT: Do not use a domestic type detergent in this machine at any time. This type of detergent may damage and/or obstruct pump operation or cause corrosion in the tank.

HT-1 DISPENSING EQUIPMENT- ELECTRICAL CONNECTION: Power and signal source for the detergent and rinse aid are pro- vided as follows:

1.DETERGENT SIGNAL-White/red wire, signal (line voltage) for detergent dispensing. Connected between the normally closed contact (N.C.) of C6 cam and the Detergent Pump Motor (SM) also connecting to the Detergent Prime Switch (S4). Detergent will be dispensed during the rinse cycle.

2.DISPENSER POWER-White wire (line voltage). Connected between Detergent Primer Switch (S4) and the On/Fill-Off/Drain Switch (S1).

All conduit and wiring for the interconnections is shipped pre-mounted to the HT-1 Chemical Dispensing Equipment. For connec- tions to the dishmachine the wires terminate with butt splice connectors. When installing the chemical dispensing wiring match the correct wire colors then crimp the connectors.

HT-2 DISPENSING EQUIPMENT- ELECTRICAL CONNECTION: Power and signal source for the detergent and rinse aid are pro- vided as follows:

1.DETERGENT SIGNAL-White/red wire, signal (line voltage) for detergent dispensing. Connected between the normally closed contact (N.C.) of C6 cam and the detergent terminal of the Speed Control Circuit Board (SC). Detergent will be dispensed during the rinse cycle.

2.DISPENSER POWER-Red wire, (line voltage) Connected between “L2” and the “C” terminal on the step-down transformer in the HT-2 box.

3.DISPENSER POWER-White wire (line voltage). Connected between “L1” and the appropriate line voltage terminal on the step- down transformer in the HT-2 box.

4.RINSE AID SIGNAL-Blue wire, (line voltage). Signal for dispensing the rinse aid. Connected between the normally closed con- tact (N.C.) of the C5 cam and the rinse aid terminal of the Speed Control Circuit Board (SC). Rinse aid will be injected into the final rinse line during the rinse cycle.

All conduit and wiring for the interconnections is shipped pre-mounted to the HT-2 Chemical Dispensing Panel. For connections to the dishmachine the wires terminate with butt splice connectors. When installing the chemical dispensing wiring match the correct wire colors then crimp the connectors.

DETERGENT RECOMMENDATIONS: We suggest that you contact your local detergent specialist for the correct detergent for your area.

LIQUID DETERGENT DISPENSING POINT: Liquid detergent will be dispensed into machine from factory supplied hole at back of the tub above the basket strainer. Remove factory installed plug and install injector fitting for the detergent.

RINSE ADDITIVE INJECTION-FINAL RINSE LINE (HT-2 ONLY): Rinse Aid will be injected into the final rinse line at the rear of the machine. Remove one of the 1/4” plugs from the line and install the rinse aid injector fitting.

TIMER ADJUSTMENT FOR DETERGENT CONCENTRATION: The amount of detergent may need to be increased or decreased depending on water quality and type of detergent. It is factory set to dispense 15 ml of detergent into the wash water during the rinse cycle. Consult your detergent representative for adjustment.

VOLTAGE CHECK: Ensure that the power switch is in the OFF position and apply power to the dishmachine. Check the incoming power at the terminal block and ensure it corresponds to the voltage listed on the data plate of the dishmachine. If not, contact a qualified service agency to examine the problem. Do not run the dishmachine if the voltage is too high or too low. Shut off the ser- vice breaker and mark it as being for the dishmachine. Advise all proper personnel of any problems and of the location of the ser- vice breaker. Replace the front kick panel and tighten down the screws.

4

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Technical Manual Page Revision Date Made Applicable By ECN Details Nomenclature for the Models Covered in this Manual Model Serial No Installation Date Service Rep. Name Phone NoElectrical Schematics INSTALLATION/OPERATION InstructionsJackson Maintenance & Repair Centers III. PartsSection Specification Information Specification Information Dimensions Section INSTALLATION/OPERATION Instructions Page Page Page Installation Instructions & Diagrams for the HT-1 & HT-2 Installation Instructions & Diagrams for the LT-1 & LT-3 Priming Chemical Feeder Pumps Priming Chemical Feeder Pumps Page Page Page Page Page Page Page Page Section Parts Section Parts Section HT-1 Assembly QTY Description Parts Section HT-2 Assembly QTY Description Parts Section HT-2 Inner Panel Assembly Parts Section LT-1 Assembly Parts Section Parts Section LT-3 Assembly QTY Description Parts Section Chemical Feeder Pump Assembly Section Electrical Schematics RED Electrical Diagrams HT-2 115 VOLT, 60 HERTZ, Single Phase Page Electrical Diagrams LT-1 115 VOLT, 60 HERTZ, Single Phase Electrical Diagrams LT-3 115 VOLT, 60 HERTZ, Single Phase Electrical Diagrams LT-3 240 VOLT, 60 HERTZ, Single Phase Section Jackson Maintenance Repair Centers Alaska Jackson Maintenance & Repair Centers Alabama to HawaiiArizona ArkansasIllinois Jackson Maintenance & Repair Centers IdahoIndiana IowaNEW Mexico NevadaNEW Hampshire MissouriNorth Dakota North Carolina to TexasOhio OklahomaVermont UtahVirginia Washington

LT-3, LT-1, HT-1, HT-2 specifications

The Jackson HT-2, HT-1, LT-1, and LT-3 are notable models in Jackson’s lineup of electric guitars, each designed to cater to specific playing styles and preferences. These instruments are renowned for their quality, playability, and distinctive sound, making them favorites among musicians across various genres.

The Jackson HT-2 is a versatile model that offers an array of features designed for performance and comfort. It typically features a lightweight body made from high-quality basswood or poplar, which enhances resonance and sustain. The HT-2 is equipped with a fast-playing maple neck and a compound radius fingerboard, allowing for effortless playability, whether playing chords or intricate solos. The guitar’s dual high-output humbucking pickups deliver a powerful tonal palette, ensuring that players can achieve a wide range of sounds, from heavy distortion to clear cleans.

The HT-1 offers a more compact design but does not compromise on sound or performance. It shares many features with the HT-2, including the lightweight body and comfortable neck profile. However, the HT-1 is designed with a focus on beginners and intermediate players, making it accessible while still delivering professional-quality tones. Its single-coil and humbucking pickup configuration provides versatility, allowing players to switch between bright, clean tones and warmer, thicker sounds with ease.

Moving on to the LT-1, this model is tailored for those who prefer a more straightforward approach to their sound. The LT-1 typically features a simplified control layout, making it easy for players to dial in their desired tone without any fuss. This guitar also incorporates a versatile pickup setup, often utilizing single-coil pickups that excel at producing sparkling cleans alongside punchy overdriven tones. The LT-1 is especially popular among blues and rock musicians who appreciate a responsive instrument.

Lastly, the LT-3 builds upon the characteristics of the LT-1 with enhanced features and upgraded components. The LT-3 often includes a more advanced hardware setup and premium pickups designed to offer improved clarity and enhanced tonal richness. With a slightly larger body and neck profile, it caters to players who desire both comfort and a fuller sound. The LT-3 is often favored by gigging musicians for its reliability and the breadth of sounds it can produce, making it suitable for a wide range of musical genres.

In summary, Jackson's HT-2, HT-1, LT-1, and LT-3 are thoughtfully designed guitars, each with unique features and technologies that cater to various player needs. From beginners to seasoned pros, these instruments represent a commitment to quality craftsmanship and innovation in the world of electric guitars.
Top Page Image Contents