Teledyne LXT-230 manual Calibration, Manual Output Mode, Contrast Adjustment

Page 13

6.0CALIBRATION

6.1Manual Output Mode

To perform calibrations without interfering with control or recorder functions, the LXT-230 incorporates a manual output mode. The current output is set to the desired level and saved until changed or released from the manual mode.

NOTE: Prior to any calibration the LXT-230 transmitter should be placed into the manual mode.

Procedure:

1.If not at the Main Menu, press the appropriate MENU SELECTION key to reach the Main Menu.

2.Press both horizontal CALIBRATE keys simultaneously to enter the calibrate mode and observe the "M" appear in front of the % current output value; The current output is now locked in the manual mode.

3.Using the horizontal CALIBRATE keys, position the cursor under the digit to be adjusted.

4.Increase or decrease the value by pressing the appropriate vertical CALIBRATE key.

5.When the desired value is reached, exit the calibrate mode by pressing either MENU SELECTION key. The current output will be held at the filed value.

pH

7.00

M24.3%

25.0°C

 

 

ORP

-500.0 mV

M 55.0%

25.0°C

 

 

To release manual output:

1.Return to the Main Menu by pressing the appropriate MENU SELECTION key.

2.Observe that the "M" appears in front of the % current output value. The "M" signifies that the output is being held at the displayed value.

3.Press the left-hand CALIBRATE key and observe the "M" disappear, releasing the LXT-230 from the manual output mode. The % output value will return to the real- time current output.

6.2Contrast Adjustment

Procedure:

1.Press the upper MENU SELECTION key to reach the Contrast Menu (upper most menu).

2.Press both horizontal CALIBRATE keys simultaneously to enter the calibrate mode. Observe the cursor move to the last digit.

3.Using the horizontal CALIBRATE keys, position the cursor under the digit to be adjusted.

4.Increase or decrease the value by pressing the appropriate vertical CALIBRATE key.

5.To file the contrast value and exit the calibrate mode, press either MENU SELECTION key.

6.3One-Point Buffer Calibration (Standardize)

Because all pH and ORP electrodes experience minor variations, buffer calibrations are necessary before installing the electrodes in service. Also, occasional calibrations are necessary to compensate for electrode degradation while in service. For measurement specifics, refer to the pH/ORP sensor manual.

Model LXT-230 Instruction Manual / 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model LXT-230 Transmitter Table of Contents Temperature Units Calibration Celsius/Fahrenheit Conversion General Description Unpacking the InstrumentDual Input Optional PID Output OptionalDual Output Optional Three Outputs OptionalPower Wiring InstallationSensor Wiring MountingKey Functions FamiliarizationDisplay Menus and Screens Main Menu Electrode Diagnostic ScreenElectrode Standardization Menu Electrode Span MenuOutput Calibration Menu Temperature Calibration MenuDiagnostic set up and configuration menus Sentinel DiagnosticsPage Cleaning MaintenanceReplacement of the Microprocessor Contrast Adjustment Manual Output ModeCalibration One-Point Buffer Calibration StandardizeTwo-Point Buffer Calibration Span Procedure at the Standardization Menu Calibration Using a Grab Sample as a StandardBack-to-Factory Calibration Output CalibrationTemperature Units Calibration Celsius/Fahrenheit Conversion Temperature Calibration Trim AdjustmentProcedure for trim adjust Page TMP1 LXT-230 Model Number DesignatorsWiring Troubleshooting GuideCheck polarity of transmitter Check the sensor Measurement Range Appendix a Specifications

LXT-230 specifications

The Teledyne LXT-230 is a versatile and advanced sensor solution tailored for the demanding realms of aerospace, defense, and industrial applications. Designed to meet the high-performance requirements of these sectors, the LXT-230 brings together a blend of cutting-edge technologies and robust design to ensure reliability and precision.

One of the standout features of the LXT-230 is its exceptional data processing capability. The sensor incorporates a powerful onboard processing unit, which enables real-time data analysis and decision-making. This feature is crucial in applications where time is of the essence, such as in defense systems or real-time surveillance. The onboard processing not only enhances the speed of data acquisition but also reduces the need for extensive external processing resources.

In terms of sensing technology, the LXT-230 utilizes advanced photonics and electronic systems, allowing it to capture a diverse range of environmental parameters with high accuracy. Its multi-modal sensor architecture enables it to function effectively across various spectrum ranges, ensuring its adaptability to different operational contexts. Whether it’s monitoring atmospheric conditions, assessing structural integrity, or gathering intelligence, the LXT-230 excels in delivering reliable and precise outcomes.

The robust construction of the LXT-230 further enhances its appeal. Designed to withstand extreme environmental conditions, the sensor features robust materials that offer resistance to harsh weather, vibrations, and temperature fluctuations. This durability makes it particularly well-suited for deployment in remote and challenging locations, where other sensors might fail.

Another notable characteristic of the Teledyne LXT-230 is its user-friendly interface and flexible connectivity options. The system supports multiple communication protocols, allowing for seamless integration with other hardware and software platforms. This versatility ensures that operators can easily implement the LXT-230 into existing systems without undergoing substantial modifications.

Additionally, the LXT-230 is designed with energy efficiency in mind. Its low power consumption allows for extended operational periods, crucial for applications where continuous monitoring is required. As industries increasingly focus on sustainability and reduced operational costs, this energy-efficient design presents a significant advantage.

In summary, the Teledyne LXT-230 stands out as a premier sensor solution in today's tech-driven landscape. Its advanced processing capabilities, adaptable sensing technologies, robust construction, and user-friendly design make it an indispensable tool across various applications. Whether utilized in military operations, industrial monitoring, or scientific research, the LXT-230 is poised to deliver performance and reliability in challenging environments.
Top Page Image Contents