Jackson Delta 5, DELTA 5 D technical manual Washing a Rack of Ware

Page 14

SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS

OPERATION INSTRUCTIONS (CONTINUED)

NOTE: The machine must run a complete cycle to drain and fill. If the machine is not allowed to drain, the water will build up inside the tub. After the initial fill, the rinse water for the current cycle will become the wash water for the next cycle.

The dishmachine is now ready to proceed with the washing of dishes.

WARNING: Certain materials, including silver, silver plate, aluminum and pewter, are attacked by sodium hypochlorite sanitizers (bleach).

PREPARING DISHES: Preparation of the ware will help ensure good results and less re-washes. If not done properly the dishes will not be clean and will reduce the efficiency of the dishmachine.

The following steps should be followed to ensure good results:

A. Remove all scraps and gross soil into a garbage can. B. Separate and pre-soak silverware.

C. Separate and pre-soak the egg and casserole dishes. D. Scrape all ware with a brush or spatula.

E. Flush cups, bowls and glasses with running water.

F. Prewash dishware by soaking or spraying with a pre-rinse hose.

G. Place dishes and cups in dish rack. Cups should be upside down (so they don’t hold water).

H. Place glasses and flatware in their respective racks. Scatter flatware loosely in rack. Glasses should be placed upside down in a properly sized rack. For optimal results, flatware should be washed twice, the first being horizontal, the second in a special rack to hold flatware vertical.

DAILY MACHINE PREPARATION: Before proceeding with start-up, verify the following:

A. Open door and verify that the sump strainer is in place in the sump.

B. Verify that the drain stopper is in position.

C. Check that the plugs are securely screwed into the ends of all wash arms.

D. Check that the wash arms are securely screwed into the stationary bases and rotate freely.

E. Check levels in all chemical containers and replace if empty.

F. For initial fill, close doors then depress the “FILL” switch to the “FILL” position.

WASHING A RACK OF WARE:

A. Open doors, place a full rack into the machine, and close doors. Push the start switch and hold until unit starts (about 2 seconds). B. After cycle is completed open doors and remove rack.

C. Repeat steps A and B.

SHUT DOWN AND CLEANING:

A. At the end of mealtime, move the “ON/OFF” switch to the “OFF” position.

B. Open doors and manually remove drain stopper to drain the unit.

C. Remove and clean upper and lower wash arms.

D. Remove and clean the sump strainer.

Delta 5 Installation & Operation Manual 7610-003-37-08

Issued: 05-25-2007 Revised: N/A

8

Image 14
Contents INSTALLATION/OPERATION & Technical Manual For Jackson ModelsManufacturers Warranty ONE Year Limited Parts & Labor WarrantyStop Pare Arret MAW Delta Nomenclature for the Models Covered in this ManualTable of Contents Section Specification Information Specification Information Dimensions INSTALLATION/OPERATION Instructions INSTALLATION/OPERATION Instructions Installation InstructionsElectrical Installation Instructions INSTALLATION/INITIAL START-UP Procedure Operation InstructionsWashing a Rack of Ware Priming Chemical Feeder Pumps Chemical Dispensing EquipmentTo Prepare Chemical Feeder Pumps for Operation INSTALLATION/OPERATION Instructions Detergent Control Section Preventative Maintenance Preventative Maintenance Section Troubleshooting Troubleshooting Section Common ProblemsSecton 4 Troubleshooting Section Problem Rinse water not at required temperature rangeSection Parts Section Chemical Feeder Pump Assembly Parts SectionSolenoid Valve Repair Parts Kits Control BOX Assembly 2120 25, 26 QTY Description PERI-PUMP BOX Assembly Electrical Connection BOX Assembly Ecolab No Mfg. NoFrame Assembly Hood Assembly Switch Panel Assembly TUB Assembly Tub Weldment Frame and Motor Assembly Discharge Tube Connector Motor & Pump Assembly Other parts not shownBooster Tank Assembly Incoming Plumbing Assembly Door Assembly Front Panel Assembly Section Electrical Schematics Electrical Schematics Delta 5 115V, 50/60 HERTZ, Single PhaseSection Jackson Maintenance Repair Centers Jackson Maintenance & Repair Centers Alabama to FloridaService CO Florida to MarylandJackson Service Company Maryland to NEW YorkJackson Maintenance & Repair Center NEW York to PennsylvaniaRhode Island to Wisconsin Wisconsin to WYOMING/INTERNATIONAL
Related manuals
Manual 2 pages 56.91 Kb

DELTA 5 D, Delta 5 specifications

The Jackson Delta 5 is a remarkable kayak that combines advanced design with cutting-edge technology, making it a top choice for both recreational users and seasoned paddlers. Designed for versatility and performance, the Delta 5 is an ideal vessel for navigating calm lakes, flowing rivers, and coastal waters.

One of the standout features of the Delta 5 is its lightweight construction. Crafted using a high-quality polyethylene material, the kayak is durable yet easy to transport. This lightweight nature does not compromise on sturdiness; the Delta 5 can withstand varying water conditions and endure the rigors of outdoor adventures.

The kayak’s design includes a pronounced hull shape that enhances stability. This allows paddlers to feel secure and confident while maneuvering through different water environments. The Delta 5 also features a shallow V-hull profile, which not only provides excellent initial stability but also allows for efficient tracking and minimized drag. As a result, paddlers can enjoy smooth gliding across the water while saving energy during long excursions.

Comfort is another hallmark of the Jackson Delta 5. The cockpit is spacious and designed for easy entry and exit, accommodating a range of body types. The adjustable seat offers ample lumbar support and is constructed with breathable materials, ensuring comfort during extended paddling sessions. Additionally, the kayak has multiple footrest positions, allowing for a customized seating arrangement that caters to individual preferences.

The Delta 5 comes equipped with innovative technologies such as the ‘Delta Seat System,’ which provides added flexibility and comfort. This system can be adjusted in various ways to suit the paddler’s needs. Furthermore, the kayak features built-in storage compartments and bungee cord rigging on the deck that allow for safe storage of gear and personal belongings, providing ample space for day trips or longer excursions.

Safety is also a primary consideration in the design of the Delta 5. The kayak includes scupper holes that facilitate drainage and reduce the risk of water accumulation within the cockpit. Bright colors and reflective materials are used in its construction to enhance visibility in the water, contributing to the safety of the paddler.

Overall, the Jackson Delta 5 is a well-rounded kayak that meets the demands of diverse paddling experiences. Its combination of lightweight construction, advanced stability features, customizable comfort options, and thoughtful safety elements makes it an excellent choice for those looking to explore the water with confidence and ease. Whether embarking on a serene paddle or tackling new challenges, the Delta 5 stands out as a reliable companion for any paddler.