Russound R235LS, R-Series user manual Specifications, Thd+N, Warranty

Page 7

R235LS AMPLIFIER

SPECIFICATIONS

Stereo Continuous Output Power:

35W per channel at 8 ohms

 

50W per channel at 4 ohms

Bridged Output Power:

100W at 8 ohms, 2 channels bridged

THD+N:

0.05% from 20Hz to 20kHz

Signal-to-Noise Ratio:

>100dB A-weighted

Frequency Response:

20Hz to 20KHz +/- 0.3dB

Input Sensitivity:

70mV for 1W at 8 ohms

 

420mV for 35W at 8 ohms

Input Impedance:

47kohms Line Input

Voltage Gain:

32dB

Delay Time:

5 seconds to 5 minutes

Input Trigger:

12VDC 10kohms

Output Trigger:

12VDC 100mA max

Power Requirements:

North American Model:

 

120VAC 60Hz 1.2A

 

IEC 320 type connector with 3 terminal detachable power cord.

Power Requirements:

European Model:

 

230VAC 50Hz 0.6A

 

IEC 320 type connector with 3 terminal detachable power cord.

Dimensions:

8.625" W x 10"D x 2.375"H (22 x 25.4 x 6 cm)

Weight:

8.5 lbs. (3.8kg)

WARRANTY

 

The Russound R235LS is fully guaranteed for two (2) years from the date of purchase against all defects in materials and workmanship. During this period Russound will replace any defective parts and correct any defect in workman- ship without charge for either parts or labor. For this warranty to apply, the unit must be installed and used according to its written instructions. If service is necessary, it must be performed by Russound. The unit must be returned to Russound at the owners expense and with prior written permission. Accidental damage and shipping damage are not considered defects under the terms of the warranty. Russound assumes no responsibility for defects resulting from abuse or servicing performed by an agency or person not specifically authorized in writing by Russound. Damage to or destruction of components due to improper use voids the warranty. In these cases the repair will be made at the owners expense. To return for repairs, the unit must be shipped to Russound at the owners expense, along with a note explaining the nature of the service required. Be sure to pack in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit.

Russound sells products only through authorized Dealers and Distributors to ensure that customers obtain proper support and service. Any Russound product purchased from an unauthorized dealer or source, including retailers, mail order sellers and online sellers will not be honored or serviced under existing Russound warranty policy. Any sale of products by an unauthorized source or other manner not authorized by Russound shall void the warranty on the applicable product.

7

Image 7
Contents Series R235LS Safety Instructions Important SafeguardsIntroduction R235LS AmplifierFront Panel R235LS Amplifier Thermal Protection Bridged OperationProtection Circuitry Possible System Configuration Warranty SpecificationsTHD+N Series R235LS

R235LS, R-Series specifications

The Russound R-Series R235LS is a standout addition to any home audio system, designed to deliver exceptional sound quality and versatility. This product exemplifies Russound's commitment to innovation and high-performance audio technology, catering to the needs of both audiophiles and casual listeners alike.

One of the main features of the R235LS is its powerful amplification capabilities. With 35 watts per channel at 8 ohms and an impressive 70 watts per channel at 4 ohms, the R235LS is well-equipped to drive a range of speakers, ensuring clear and dynamic sound reproduction. Its ability to maintain high fidelity even at higher volumes makes it an excellent choice for home theaters and multi-room audio setups.

The R235LS supports a wide array of audio formats, providing compatibility that meets the demands of modern multimedia. It includes Bluetooth connectivity, allowing users to stream music from their smartphones or tablets effortlessly. This feature is complemented by aptX technology, ensuring high-quality audio streaming without compromising sound integrity. Additionally, the receiver is equipped with both analog and digital inputs, offering versatility for connecting various devices, including TVs, media players, and gaming consoles.

In terms of design, the R235LS boasts a sleek and compact profile, making it easy to integrate into any home environment. The front panel features a clear display and intuitive controls, allowing users to navigate settings and make adjustments with ease. Its minimalist aesthetic ensures that it will fit seamlessly into any decor while still attracting attention with its elegant finish.

Another significant aspect of the R235LS is its advanced thermal management system. This technology allows the receiver to remain cool during extended use, enhancing its longevity and reliability. Moreover, the device features protection circuitry that safeguards both the receiver and connected speakers from power surges and overloads.

Overall, the Russound R-Series R235LS is a high-quality audio receiver that combines power, versatility, and sleek design. Its array of features and technologies makes it an ideal choice for those looking to enhance their home audio experience, whether for entertaining guests or enjoying personal listening. With Russound's reputation for quality and innovation, the R235LS is a noteworthy investment for anyone serious about sound.