Russound R-Series user manual R235LS Amplifier

Page 4

R235LS AMPLIFIER

1

2

3

4

5

6

7

8

10

 

 

 

 

9

7

 

1Line Input: The line audio input is a sensing input that will activate the amplifier when an audio signal from a source is present. Only the Left input is used for bridged mode operation.

2Gain Controls: Left and Right gain controls inde- pendently adjust the sound level for each channel. When in bridged mode only the Left control is used.

3Delay Time: The delay can be adjusted from about 5 seconds to 5 minutes. When an audio signal is not present, this delay setting will automatically switch the amp to the Default input mode after the preset period of time.

412VDC Trigger In/Out: The 12V Trigger In con- trols the amplifier switching from the default input (distributed audio system) to a local source. The Trigger Out provides 100mA 12V max. This can be used to drive other 12V triggered devices. The delay and audio sensing are bypassed when the 12V trigger input is used.

5Stereo/Bridge Mono Switch: Sets the pair of amplifier channels for stereo or bridged mono oper- ation.

6Default Input: The default input is a speaker-level passthrough from the default input to the speaker output.

7Speaker A/B Outputs: The A and B speaker out- puts are in parallel to the amplifier output. The mini- mum load in stereo mode is 4 ohms. This can be used to drive up to 2 pairs of 8-ohm speakers or 1 pair of 4-ohm speakers. The minimum load imped- ance for bridged mode operation is 8 ohms, Speaker B only.

8AC Input: The AC voltage input for the North American model is 120VAC at 60Hz (for the European model, 230VAC at 50Hz). This receptacle accepts a 3-prong IEC 320 type connector. A detachable 3-terminal power cord is included.

9Amplified Input: The amplified input accepts speaker level signals and is a sensing input that will activate the amplifier when an audio signal is present.

10Video Input: The Video Input is a sensing input that activates the R235LS when a video signal is present.

4

Image 4
Contents Series R235LS Important Safeguards Safety InstructionsIntroduction R235LS AmplifierFront Panel R235LS Amplifier Thermal Protection Bridged OperationProtection Circuitry Possible System Configuration Warranty SpecificationsTHD+N Series R235LS

R235LS, R-Series specifications

The Russound R-Series R235LS is a standout addition to any home audio system, designed to deliver exceptional sound quality and versatility. This product exemplifies Russound's commitment to innovation and high-performance audio technology, catering to the needs of both audiophiles and casual listeners alike.

One of the main features of the R235LS is its powerful amplification capabilities. With 35 watts per channel at 8 ohms and an impressive 70 watts per channel at 4 ohms, the R235LS is well-equipped to drive a range of speakers, ensuring clear and dynamic sound reproduction. Its ability to maintain high fidelity even at higher volumes makes it an excellent choice for home theaters and multi-room audio setups.

The R235LS supports a wide array of audio formats, providing compatibility that meets the demands of modern multimedia. It includes Bluetooth connectivity, allowing users to stream music from their smartphones or tablets effortlessly. This feature is complemented by aptX technology, ensuring high-quality audio streaming without compromising sound integrity. Additionally, the receiver is equipped with both analog and digital inputs, offering versatility for connecting various devices, including TVs, media players, and gaming consoles.

In terms of design, the R235LS boasts a sleek and compact profile, making it easy to integrate into any home environment. The front panel features a clear display and intuitive controls, allowing users to navigate settings and make adjustments with ease. Its minimalist aesthetic ensures that it will fit seamlessly into any decor while still attracting attention with its elegant finish.

Another significant aspect of the R235LS is its advanced thermal management system. This technology allows the receiver to remain cool during extended use, enhancing its longevity and reliability. Moreover, the device features protection circuitry that safeguards both the receiver and connected speakers from power surges and overloads.

Overall, the Russound R-Series R235LS is a high-quality audio receiver that combines power, versatility, and sleek design. Its array of features and technologies makes it an ideal choice for those looking to enhance their home audio experience, whether for entertaining guests or enjoying personal listening. With Russound's reputation for quality and innovation, the R235LS is a noteworthy investment for anyone serious about sound.