Siemens AC75 manual SMS related CMS Error Codes GSM

AC75 AT Command Set

2.12 AT+CMEE

s

<err> Code	Text (if AT+CMEE=2)
596	GPRS - invalid cid value
607	GPRS - missing or unknown APN
625	GPRS - pdp type not supported
630	GPRS - profile (cid) not defined
632	GPRS - QOS not accepted
633	GPRS - QOS validation fail
643	GPRS - unknown PDP address or type
644	GPRS - unknown PDP context
646	GPRS - QOS invalid parameter

Table 2.8: SMS related "CMS ERROR" Codes (GSM 07.05)

	<err> Code	Text (if AT+CMEE=2)
1		Unassigned (unallocated) number
8		Operator determined barring
10		Call barred
21		Short message transfer rejected
27		Destination out of service
28		Unidentified subscriber
29		Facility rejected
30		Unknown subscriber
38		Network out of order
41		Temporary failure
42		Congestion
47		Resources unavailable, unspecified
50		Requested facility not subscribed
69		Requested facility not implemented
81		Invalid short message transfer reference value
95		Invalid message, unspecified
96		Invalid mandatory information
97		Message type non-existent or not implemented
98		Message not compatible with short message protocol state
99		Information element non-existent or not implemented
111		Protocol error, unspecified
127		Interworking, unspecified
128		Telematic interworking not supported
129		Short message Type 0 not supported
130		Cannot replace short message
143		Unspecified TP-PID error
144		Data coding scheme (alphabet) not supported
145		Message class not supported
159		Unspecified TP-DCS error
160		Command cannot be actioned
AC75_ATC_V01.002		Page 51 of 569	10/30/06
Confidential / Released