Siemens AC75 manual Atsgact Query all PDP context activations, Atsgact=?, Atsgact?

AC75 AT Command Set

11.14 AT^SGACT

s

11.14AT^SGACT Query all PDP context activations

Syntax

Test Command

AT^SGACT=?

Response(s)

^SGACT: (range of supported <ifc>s) , (range of supported <state>s)

OK

Read Command

AT^SGACT?

Response(s)

[^SGACT: <ifc>, <cid>, <state>]

[^SGACT: <ifc>, <cid>, <state>]

[^SGACT: ...]

OK

Exec Command

AT^SGACT

Response(s)

^SGACT: <sum>

OK

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

+ + + + + + + - + -

Command Description

The test command returns supported interfaces and states.

The read command lists the activation states for all activated PDP contexts of the ME. Contexts, which are cre- ated internally by the GPRS modem compatibility commands, will displayed only, if they are activated. The Out- put of this command is unsorted.

The exec command returns the sum of all activated PDP contexts of the ME.

Parameter Description

<ifc>(num)

Interface

Indicates the interface on which a particular PDP context was defined. Every PDP context defined with the com- mand AT+CGDCONT or internally by the GPRS modem compatibility commands is identified one-to-one by its (local) context identifier and the interface on which it was defined. The range of supported interfaces is returned by the test command.

0	ASC0 or Multiplex channel 1
1	ASC1 or Multiplex channel 2
2	USB or Multiplex channel 3

<cid>(num)

PDP context identifier

The interface local identifier which was used to define a PDP context using the command AT+CGDCONT or which was created internally by using the GPRS modem compatibility commands ATD*98# or ATD*99#. The range of supported values is returned by the AT+CGDCONT test command. Values 3 and 4 will be used by the GPRS modem compatibility commands ATD*98# or ATD*99# if no context identifier was specified as the command was invoked.

AC75_ATC_V01.002	Page 339 of 569	10/30/06
Confidential / Released