AC75 AT Command Set

8.11 AT^SMONG

s

8.11AT^SMONG GPRS Monitor

The AT^SMONG command supplies GPRS specific cell information. There are two ways to retrieve the informa- tion: once on request by using the execute command or automatically every <period> seconds by using the write command. To stop the periodic presentation type "AT" or "at".

Syntax

Test Command

AT^SMONG=?

Response(s)

^SMONG:(list of supported <table>s), (list of supported <period>s)

OK ERROR +CME ERROR

Exec Command

AT^SMONG

Response(s)

GPRS Monitor

Cell Info Table (see: Section 8.11.1, AT^SMONG Cell Info Table)

OK ERROR +CME ERROR

Write Command

AT^SMONG=<table>[, <period>]

Response(s)

^SMONG: GPRS Monitor

Cell Info Table (see: Section 8.11.1, AT^SMONG Cell Info Table)

OK ERROR +CME ERROR

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

+

+

+

+

+

+

+

-

-

-

Parameter Description

<table>(num)

1

Cell Info Table

<period>(num)

Display period in seconds

If <period> is omitted the cell data will be presented only once on a single line (as if Execute command was issued).

If <period> is given, the cell data will be listed repeatedly on 10 data lines. Every 10th data line is followed by the header, simply to repeat the column titles.

1...100

AC75_ATC_V01.002

Page 215 of 569

10/30/06

Confidential / Released

 

 

Page 215
Image 215
Siemens AC75 manual Atsmong Gprs Monitor, Atsmong=?, ATSMONG=table, period, Tablenum