Siemens AC75 manual Statnum, Traffic channel assignednum

AC75 AT Command Set

7.22 AT^SLCC

s

<stat>(num)

state of the call
0	Active
1	Held
2	Dialing (MOC)
3	Alerting (MOC)
4	Incoming (MTC)
5	Waiting (MTC)
<mode>(num)
bearer/teleservice
0	Voice
1	Data
2	Fax
3	Voice followed by data, voice mode (only in connection with single numbering
	scheme AT+CSNS)
4	Alternating voice/data, voice mode (only in connection with single numbering
	scheme AT+CSNS)
5	Alternating voice/fax, voice mode (only in connection with single numbering
	scheme AT+CSNS)
6	Voice followed by data, data mode (only in connection with single numbering
	scheme AT+CSNS)
7	Alternating voice/data, data mode (only in connection with single numbering
	scheme AT+CSNS)
8	Alternating voice/fax, fax mode (only in connection with single numbering
	scheme AT+CSNS)
9	Unknown
<mpty>(num)
0	Call is not one of multiparty (conference) call parties
1	Call is one of multiparty (conference) call parties
<traffic channel assigned>(num)
0	No traffic channel assigned. Transmission of DTMF tones not possible.
1	Traffic channel is assigned and the progress indicator IE has been received
	(call setup) or a voice connection has an active state. The parameter indicates

that the audio path is activated. DTMF tones can be sent with AT+VTS. See also note below.

<number>(str)

Phone number in format specified by <type>

<type>(num)

	Type of address octect
145		Dialing string <number> includes international access code character '+'
129		Otherwise
AC75_ATC_V01.002		Page 184 of 569	10/30/06
Confidential / Released