Siemens AC75 manual SAP Request Message Parameters, SAP Response Message Parameters

AC75 AT Command Set

15.2 AT^SRSM

s

15.2.1SAP Request Message Parameters

The table below shows all SAP request message parameters sent

•when an "^SRSM" URC is issued by an ME acting as SAP client

•and then the AT^SRSM write command is used to transfer data to the SAP server. SAP Request Message Parameter Mapping:

Id

0

2

5

7

9

11

13

15

19

SAP Message Name	SAP parameter mapping to AT^SRSA parame-
	ters
	<RsaMsgId> [,<RsaMsgData> [,<RsaMs-
	gLen> [,<RsaMsgRc>]]]
CONNECT_REQ	0,,<MaxMsgSize>
DISCONNECT_REQ	2
TRANSFER_APDU_REQ	5,<CmdApdu>,<CmdApduLen>
TRANSFER_ATR_REQ	7
POWER_SIM_OFF_REQ	9
POWER_SIM_ON_REQ	11
RESET_SIM_REQ	13
TRANSFER_CARD_READER _STATUS_REQ	15
SET_TRANSPORT_PROTOCOL_REQ	19,<TransportProtocol>

15.2.2SAP Response Message Parameters

The table below shows all SAP response and indication message parameters sent when

•an "^SRSM" URC is issued by an ME acting as SAP server

•and then the AT^SRSM write command is used to transfer data to the SAP client. SAP Response Message Parameter Mapping:

Id

1

3

4

6

8

10

12

14

16

17

18

20

SAP Message Name	SAP parameter mapping to AT^SRSA parame-
	ters
	<RsaMsgId> [,<RsaMsgData> [,<RsaMs-
	gLen> [,<RsaMsgRc>]]]
CONNECT_RESP	1,,<MaxMsgSize>,<ConnStatus>
DISCONNECT_RESP	3
DISCONNECT_IND	4,,,<DiscType>
TRANSFER_APDU_RESP	6,<RspApdu>,<RspApduLen>,<ResCode>
TRANSFER_ATR_RESP	8,<ATR>,<AtrLen>,<ResCode>
POWER_SIM_OFF_RESP	10,,,<ResCode>
POWER_SIM_ON_RESP	12,,,<ResCode>
RESET_SIM_RESP	14,,,<ResCode>
TRANSFER_CARD_READER	16,,<CardRdStatus>,<ResCode>
_STATUS_RESP
STATUS_IND	17,,,<StatusChange>
ERROR_RESP	18
SET_TRANSPORT_PROTOCOL_RESP	20,,,<ResCode>

AC75_ATC_V01.002	Page 425 of 569	10/30/06
Confidential / Released